Abstract:Light emission from semiconductors depends not only on the efficiency of carrier injection and recombination but also extraction efficiency. For ultraviolet emission from high band gap materials such as ZnO, nanowires have higher extraction efficiencies than thin films, but conventional approaches for creating a p-n diode result in low efficiency. We exploited the noncentral symmetric nature of n-type ZnO nanowire/p-type GaN substrate to create a piezoelectric ! potential within the nanowire by applying stress. Because of the polarization of ions in a crystal that has noncentral symmetry, a piezoelectric potential (piezopotential) is created in the crystal under stress. The piezopotential acts as a "gate" voltage to tune the charge transport and enhance carrier injection, which is called the piezo-phototronic effect. We propose that band modification traps free carriers at the interface region in a channel created by the local piezoelectric charges. The emission intensity and injection current at a fixed applied voltage have been enhanced by a factor of 17 and 4, respectively, after applying a 0.093% compressive strain and improved conversion efficiency by a factor of 4.25. This huge enhanced performance is suggested arising from an effective increase in the local "biased voltage" as a result of the band modification caused by piezopotential and the trapping of holes at the interface region in a channel created by the local piezoelectric charges near the interface. Our study can be extended from ultraviolet range to visible range for a variety of optoelectronic devices that are important for today's safe, green, and renewable energy technology.

Analysis and Stress Optimization of a Strained Germanium Tin Light-Emitting Diode with Silicon Nitride Stressor

Enhancing Light Emission of Zno Microwire-Based Diodes by Piezo-Phototronic Effect

Simulation and optimization of strained GeSn laser with SiN-induced stress

Strained Germanium LED with SiN Stressor and Microbridge based on Edge Stress Concentration

Improving Performance of Si/CdS Micro-/Nanoribbon P-N Heterojunction Light Emitting Diodes by Trenched Structure

Uniformly Tensile-Strained Germanium Enabled by a Recessed Nitride Stressor for Efficient Integrated Photodetectors at Longer Wavelengths

Strain-Induced Enhancement of Electroluminescence from Highly Strained Germanium Light-Emitting Diodes

Strained GeSn laser with multiple fins structure based on SiN stress

Strained Germanium Microbridge LED Array Using Elliptical Windows Etching

Direct Bandgap Light Emission from Strained Ge Nanowires Coupled with High-Q Optical Cavities

A case report of an obesity hypoventilation syndrome associated with obstructive sleep apnea due to a carotid body paraganglioma.

Direct-Bandgap Electroluminescence from Germanium with Subband Engineering Utilizing a Metal-Oxide-Semiconductor Structure

A Nanomembrane-Based Bandgap-Tunable Germanium Microdisk Using Lithographically-Customizable Biaxial Strain for Silicon-Compatible Optoelectronics

Strain Engineering for Germanium-on-Insulator Mobility Enhancement with Phase Change Liner Stressors*

Direct bandgap emission from strain-doped germanium

Bandgap-customizable germanium using lithographically determined biaxial tensile strain for silicon-compatible optoelectronics

Design of Tensile-Strained GeSn/SiGeSn Structure for Low Threshold Mid-infrared Laser Application

Atomic-scale Stress Modulation of Nanolaminate for Micro-Led Encapsulation.

Tensile-strained germanium microdisk electroluminescence

Tuning the Electro-optical Properties of Germanium Nanowires by Tensile Strain