Abstract:Catalytic growth of silicon nanowires (SiNWs), mediated by metallic droplet, provide ideal quasi-1D channels to construct high performance field effect transistor (FET). However, the incorporation of catalytic metal atoms into SiNWs channels has significant impact on the FET characteristics, and thus needs to be better understood and controlled to fulfil its potential for high performance electronics. In this work, we focus on the effect of the incorporation of indium (In) catalytic atoms into planar SiNWs, grown via an in-plane solid-liquid-solid (IPSLS) mechanism, on the FET device performance. It is found that the initial high concentration of p-type In dopants in the as-grown SiNWs led to an equivalent boron (B) doping of 5x10(18) cm(-3). However, a simple step-wise annealing in oxygen at different temperatures, varied from 620 degrees C to 920 degrees C, can help to out-diffuse the dissolved In atoms into the surface SiO2 layer, and reduce the In concentrations down to <5x10(17) cm(-3), as verified by atom-probe tomography (APT) and four-point-probe measurements. This effective dopant control enables a remarkable device performance improvement of the Schottky barrier FETs, built upon an orderly array of parallel SiNWs of approximately 25 nm in diameter, where the current ratio (I-on/I-off) has been substantially boosted from 10(5) to 10(8), while the subthreshold swing (SS) reduced from 400 mV/dec down to similar to 100 mV/dec, with a hole carrier mobility increased from 10 to similar to 75 cm(2) V-1 s(-1) as extracted according to a finite element analysis. These results pave the way for the employment of the catalytic IPSLS SiNWs to serve as high quality 1D channels for high-performance SiNWs-based electronics and sensors.

Comprehensive Understanding of Schottky Barrier Tunneling FET Built Upon Ultrathin Silicon Nanowire for Monolithic 3D Integration

Monolithic Three‐dimensional Integration of Aligned Carbon Nanotube Transistors for High‐performance Integrated Circuits

Deep Insight into Channel Engineering of Sub-3 Nm-Node P-Type Nanosheet Transistors with a Quantum Transport Model

A Novel Planar InAs/Si Hetero-TFET with Buried Drain Design and Face-tunneling Technique

High performance tunnel field-effect transistor by gate and source engineering.

Simulation of Novel Nano Low-Dimensional FETs at the Scaling Limit

Facile 3D Integration of Si Nanowires on Bosch-etched Sidewalls for Stacked Channel Transistors

Device physics and design of T-gate Schottky barrier tunnel FET with adaptive operation mechanism

Monolithic 3D integration of back-end compatible 2D material FET on Si FinFET

Toward monolithic growth integration of nanowire electronics in 3D architecture: a review

Performance Improvement of Planar Silicon Nanowire Field Effect Transistors Via Catalyst Atom Doping Control

Fabrication and Characterization of a Novel Si Line Tunneling TFET with High Drive Current

Monolithic three-dimensional integration of complementary two-dimensional field-effect transistors

Self-depleted T-gate Schottky barrier tunneling FET with low average subthreshold slope and high ION/IOFF by gate configuration and barrier modulation

Atomically Thin Van Der Waals Tunnel Field-Effect Transistors and Its Potential for Applications

Converging-guiding-track Design Enables 100% Growth Deployment Rate of Ultrathin Monocrystalline Silicon Nanowire Channels

Leakage and Thermal Reliability Optimization of Stacked Nanosheet Field-Effect Transistors with SiC Layers

Electronic Structure and Quantum Transport Properties of 2D SiP: A First-Principles Study

Two-Dimensional Silicon Atomic Layer Field-Effect Transistors: Electronic Property, Metal-Semiconductor Contact, and Device Performance

In-plane Schottky-barrier field-effect transistors with a 4-nm channel based on 1T/2H MoTe<sub>2</sub> and WTe<sub>2</sub>

Towards Schottky-Barrier Source/Drain Mosfets