Abstract:Research interest in thin-film transistor (TFT)-based flexible electronics for next-generation foldable and rollable displays is increasing, centering on flexible plastic substrates such as polyethylene terephthalate (PET), polyethylene naphthalate (PEN), and polyimide (PI). For flexible electronics using plastic substrates, it is important to select suitable semiconductor materials that can be deposited at low substrate temperature. Metal oxide (MO) semiconductors such as indium-gallium-zinc oxide (IGZO), zinc oxide (ZnO) are attracting attention as suitable candidates for plastic substrate electronics because of their higher mobility and optical transmittance than hydrogenated amorphous silicon (a-Si:H). In addition, since it can be processed at a lower temperature than low-temperature polysilicon (LTPS), it can be easily applied to flexible plastic substrates. One of the greatest advantages of MO is that it can be easily fabricated by conventional semiconductor processing methods such as sputtering, atomic laser deposition, and solution processes. Among them, solution-processed deposition method is particularly advantageous in terms of manufacturing efficiency because it does not require a separate vacuum system, and can efficiently utilize raw materials, so the fabrication cost is inexpensive. In particular, spray pyrolysis can guarantee environmental stability, high mobility, and large area production than other solution processes. In this work, we developed the high-performance, flexible a-IGZO/Al 2 O 3 TFTs using spray pyrolysis fabricated on the flexible PI substrate. In a previous study, we developed a method to reduce curling and electrostatic discharge (ESD) damage to PI substrates by using a mixture of carbon nanotubes (CNTs) and graphene oxide (GO) between carrier glass and PI substrate. Therefore, it was possible to mechanically detach the TFTs on PI substrate and handle them easily even after detachment. The spray-pyrolyzed Al 2 O 3 film is one of the high-k dielectric materials, which can lower the operating voltage, so the low-power consumption of the TFT backplane can be realized. The flexible spray-pyrolyzed a-IGZO/Al 2 O 3 TFT exhibits the field-effect mobility (μ FE ) of 9.75 cm 2 V −1 s −1 , threshold voltage (V TH ) of −0.8 V, subthreshold swing (SS) of 0.29 V dec −1 , and on/off current ratio of 6.2 × 10 7 . Even without TFT passivation layer, it shows environmental stability. The TFTs show robust electrical performance even under tensile strain with a bending radius of 1 mm. In addition, it showed stable electrical characteristics even in the repeated bending test of 30,000 cycles under compressive strain with a bending radius of 1 mm. This is due to fewer defects resulting from the smooth interface of the a-IGZO film and the Al 2 O 3 film deposited through spray pyrolysis. Therefore, spray-pyrolyzed a-IGZO/Al 2 O 3 TFT fabricated on PI substrate is a promising candidate for next-generation foldable display application. Figure 1

7-Inch Ink-jet Printing Flexible OLED Display with Narrow Bezel

8.1: Invited Paper: 17‐inch Flexible IGZO OLED Display by Ink‐jet Printing Method

31-Inch 4K Flexible Display Employing Gate Driver With Metal Oxide Thin-Film Transistors

46.3: Invited Paper: 7.1 inch full color flexible Micro‐LED display based on Topgate IGZO backplane

23‐3: High Transparent, Ultra‐thin Flexible, Full color Mini‐LED Display with IGZO TFT substrate

68‐1: Invited Paper: Realization of High PPI Notebook using inkjet Printing Technology and IGZO Backplate

9‐3: The Latest Technology Breakthroughs for 31” 4K Flexible Printed OLED TV Display Technology

Inkjet Printing Multilayer OLEDs with High Efficiency Based on the Blurred Interface

Flexible a-IGZO TFT Technology: New Developments & Applications

Highly transparent, ultra‐thin flexible, full‐color mini‐LED display with indium–gallium–zinc oxide thin‐film transistor substrate

Oxide-Semiconductor-Based TFTs for Displays and Flexible Electronics

High-Performance Flexible a-IGZO TFTs Adopting Stacked Electrodes and Transparent Polyimide-Based Nanocomposite Substrates

A Triple Layer Printed Blue OLED with Blurred Interface

Flexible IGZO Thin-Film Transistors and Inverter Circuits with Diode-Connected Transistors Fabricated on Transparent Polyimide Substrates

97‐2: Late‐News Paper: Development of High‐Mobility Indium‐rich IGZO TFT Device for IT OLED Display

High-Density Integration of Ultrabright OLEDs on a Miniaturized Needle-Shaped CMOS Backplane

Flexible Amorphous Indium-Gallium-Zinc Oxide Thin-Film Transistor with Aluminum Oxide Gate Insulator on Polyimide Substrate By Spray Pyrolysis for Foldable Display

81‐4: High Performance Coplanar Polycrystalline InGaO TFTs on Polyimide Substrate for Foldable AMOLED Display

P‐1.8: High Performance Amorphous IZO/IGZO Bilayer Thin Film Transistors for Ink‐jet Printed AMOLED Displays

Room-temperature fabrication of flexible oxide TFTs by co-sputtering of IGZO and ITO

P‐5.8: Investigation of Acrylic Inkjet Printed OCR for Mid‐Size Flexible OLED