Abstract:Fabrication of oxide thin film transistor (TFT) arrays by inkjet printing with small spacing was investigated, aiming at printing high resolution display backplanes. Two processes are involved during the printing and drying of oxide ink drops; the initial ink drop spreads to a large size upon landing on a substrate and then shrinks to a small size after the solvent dries out. The spreading of the ink drop determines how close two ink drops can be placed and the shrinkage of the ink drop after drying determines the final thickness of the printed dot. It was found that by hydrophobic treatment of the substrate surface with hexamethyldisilazane (HMDS) and octadecyltrichlorosilane (OTS) assembly, the minimum spacing (center-to-center distance) of the printed oxide dot array was reduced from over 80 mu m to 45 mu m (HMDS treated) and 35 mu m (OTS treated), while the dot diameters simultaneously decreased from 70 mu m to 20 mu m (HMDS treated) and 15 mu m (OTS treated). However, too much shrinking caused random movement of the ink drops and an increase of oxide layer thickness, both of which are detrimental to the performance of printed TFTs. To overcome these problems, the ink viscosity was adjusted by adding polyvinylpyrrolidone (PVP) to the ink. With the increase of ink viscosity, the random movement of the ink drops was suppressed and the smallest spacing of 50 mu m was achieved for printed oxide TFT arrays. Printed IGZO-TFTs annealed at 350 degrees C exhibited the highest mobility of about 6.2 cm(2) V-1 s(-1) and on-to-off current ratio of more than 10(7).

68‐1: Invited Paper: Realization of High PPI Notebook using inkjet Printing Technology and IGZO Backplate

8.1: Invited Paper: 17‐inch Flexible IGZO OLED Display by Ink‐jet Printing Method

P‐13.7: A novel approach to achieving high resolution of OLED display by ink‐jet printing method

7-Inch Ink-jet Printing Flexible OLED Display with Narrow Bezel

Inkjet Printing Multilayer OLEDs with High Efficiency Based on the Blurred Interface

67‐2: 5.5 inch Full Screen Flexible High‐Resolution OLED Display Fabricated by Ink Jet Printing Method

P‐1.8: High Performance Amorphous IZO/IGZO Bilayer Thin Film Transistors for Ink‐jet Printed AMOLED Displays

High Resolution Inkjet Printed Oxide Thin Film Transistors with Self-Aligned Fine Channel Bank Structure.

24.2: Invited Paper: High‐resolution OLED Display Fabricated by Electrohydrodynamic Printing Method

97‐2: Late‐News Paper: Development of High‐Mobility Indium‐rich IGZO TFT Device for IT OLED Display

P‐9.14: High transparent Active matrix Mini‐LED Full Color Display with IGZO TFT Backplane

34‐3: OLED Display with High Resolution Fabricated by Electrohydrodynamic Printing

Inkjet Printing for Electroluminescent Devices: Emissive Materials, Film Formation, and Display Prototypes

61‐2: Distinguished Paper: Development of the Ink‐jet Printing Technology for 55 Inch 8K AMQLED Display

P‐1.3: Development of an 11.6‐inch 144Hz LCD Utilizing an IGZO TFT Backplane

High-Performance Inkjet Printed OLEDs Realized by Improved Film Morphology

Optimization and Application of Piezoelectric Printing OLED

Achieving high performance InP quantum dot light-emitting devices by using inkjet printing

Mura‐free G8.5 220ppi inkjet printing technology for OLED and QLED display panels

Inkjet printing of oxide thin film transistor arrays with small spacing with polymer-doped metal nitrate aqueous ink

P‐6.13: 3D Stacked Hybrid TFT Integrated Circuits for 1100 PPI AMOLED Display