Abstract:Group III–V semiconductor‐based microscale light‐emitting diode (micro‐LED) displays are recognized as one of the most promising display technologies with superhigh brightness and resolution, strong contrast, and superlarge color gamut but currently suffer from low efficiency, low production yield, and high cost. Here, it is proposed to realize cost‐effective and full‐color micro‐LED displays by using microscale perovskite quantum dot LEDs (micro‐PeLEDs) as emitters. Bright and uniform red‐, green‐, and blue‐emitting (RGB) micro‐PeLED arrays with each pixel size as small as 45 µm are fabricated by in situ inkjet printing a perovskite quantum dot (PeQD) emissive layer in the structure of indium tin oxide/poly(3,4‐ethylenedioxythiophene)‐poly(styrenesulfonate) (PEDOT:PSS)/poly(9‐vinylcarbazole) (PVK)/sodium dodecyl sulfate (SDS)/PeQD/1,3,5‐tris(1‐phenyl‐1H‐benzimidazol‐2‐yl)benzene (TPBi)/LiF/Al. These RGB micro‐PeLED arrays display an external quantum efficiency of 0.832%, 0.419%, and 0.052% for red, green, and blue colors, a resolution of 210 PPI, and a wide color gamut (135% of the National Television Standards Committee standard). The authors further demonstrate flexible and full‐color active‐matrix micro‐PeLED displays, which have potential applications in future ultrahigh‐definition displays, light communication, and artificial intelligence. Microscale perovskite quantum dot light‐emitting diodes (micro‐PeLEDs) are fabricated through an “interface engineering‐inkjet printing‐plasma etching” strategy using perovskite quantum dot arrays as the emissive layer for full‐color displays with the advantages of low cost, free massive transfer, high resolution, and suitability for large‐area or flexible displays. This provides a new approach for the development of micro‐LEDs.

P‐11.5: Realization of High PPI Transparent TFT Backplane and Its Application in Micro‐LED Display

18.5: High Performance Transparent Micro‐LED Display

P‐9.14: High transparent Active matrix Mini‐LED Full Color Display with IGZO TFT Backplane

Efficient Mini/Micro-Perovskite Light-Emitting Diodes

Direct Design of Thin and High-Quality Direct-Lit LED Backlight Systems

92‐3: 1.63‐inch 403‐PPI Full‐color Active‐matrix LTPS Micro‐LED Display

P‐11.2: Super‐thin Mini‐LED Direct Back Light for Liquid Crystal Displays

23‐3: High Transparent, Ultra‐thin Flexible, Full color Mini‐LED Display with IGZO TFT substrate

Highly transparent, ultra‐thin flexible, full‐color mini‐LED display with indium–gallium–zinc oxide thin‐film transistor substrate

64‐2: Ultra‐Thin RGB Mini‐LED Backlight for High‐end Professional Liquid Crystal Displays

P‐10.4: A Non Photolithographic Black Light Shield Film for Ultra‐low Reflectivity Micro‐LED Display

Process optimization of preparing CMOS backplane for ultrahigh pixel density red Micro-LED display

46.3: Invited Paper: 7.1 inch full color flexible Micro‐LED display based on Topgate IGZO backplane

9‐3: Advanced Process and Structure of Backplane for Micro LED Display

Spatial Cross-Linking Strategy for Realizing Stable and Efficient Perovskite Light-Emitting Diodes toward Microscale Displays

57‐2: High performance LTPS TFT Backplane Using Blue Laser Diode Annealing for Mini/Micro LED Display

16‐2: A 4‐inch Full Color Active‐matrix Mini‐LED Display Based on 0408 Chip and 500um Pixel

37‐1: Invited Paper: Manufacturing Readiness of High‐Efficiency and Low‐Cost MicroLED Displays

Microscale Perovskite Quantum Dot Light‐Emitting Diodes (Micro‐PeLEDs) for Full‐Color Displays

P‐8.4: Research on Chip Layout Design and Printing Process Optimization of Mini‐LED Light Board

87‐5: AM Mini‐LED Based on LTPS TFT Backplane with over 5000 Dimming Zones and High Driving Bits