Abstract:Micro-LEDs refer to light-emitting diodes with a size of less than 50 mu m, which have superior performances compared to Liquid Crystal Displays (LCDs) and Organic Light-Emitting Diodes (OLEDs). Micro-LEDs are expected to constitute the mainstream electronic display technology in the future. Nevertheless, micro-LED technology is still facing some technical difficulties. Especially, in mass transfer technology, the non-parallel problem between the temporary substrate holding the micro-LED chips and the target substrate seriously affects the bonding quality of the micro-LED chips. To solve this problem, this paper proposes a Polydimethylsiloxane (PDMS)-based flexible composite structure temporary substrate (carrier) doped with dimethyl silicone oil, which is capable of generating a deformation of 6 mu m under a pressure of 1 MPa and maintaining this property up to 250 degrees C. Utilizing this deformation property to cope with the non-parallel problem during the bonding process can significantly improve the bonding quality and yield of micro-LEDs. We placed 1600 (40 x 40) micro-LED chips of size 30 mu m x 15 mu m on the carrier with a chip pitch of 222 mu m. The carrier was heat-treated at 250 degrees C for 2 min as an adhesion reduction method. Under a bonding temperature of 180 degrees C and a bonding pressure of 0.3 MPa, bonding of the micro-LEDs with a 1.98-inch thin film transistor (TFT) was implemented using the carriers. A micro-LED green display with a PPI of 114 was successfully fabricated, with a display yield of 95.18 % and a brightness of 18,710 cd/m2. The method developed in this paper can overcome the key challenges of micro-LEDs mass transfer technology and pave the way for the industrialization of micro-LEDs.

Highly transparent, ultra‐thin flexible, full‐color mini‐LED display with indium–gallium–zinc oxide thin‐film transistor substrate

23‐3: High Transparent, Ultra‐thin Flexible, Full color Mini‐LED Display with IGZO TFT substrate

P‐9.14: High transparent Active matrix Mini‐LED Full Color Display with IGZO TFT Backplane

Efficient Mini/Micro-Perovskite Light-Emitting Diodes

16‐2: A 4‐inch Full Color Active‐matrix Mini‐LED Display Based on 0408 Chip and 500um Pixel

46.3: Invited Paper: 7.1 inch full color flexible Micro‐LED display based on Topgate IGZO backplane

A Full-Color Micro LEDs Display Based on IGZO TFT

54‐4: A 142‐in. IGZO‐TFT Glass‐Substrate AM MiniLED Tiled Display with External Compensation and Multilayer Demura Algorithm

64‐2: Ultra‐Thin RGB Mini‐LED Backlight for High‐end Professional Liquid Crystal Displays

P‐11.5: Realization of High PPI Transparent TFT Backplane and Its Application in Micro‐LED Display

2.3: High Mobility Top‐Gate Self‐Aligned and BCE a‐IGTO TFTs Application to Micro‐LED and Mini‐LED Display

Mini‐LED Backlight Units on Glass for 75‐inch 8K Resolution Liquid Crystal Display

P‐11.2: Super‐thin Mini‐LED Direct Back Light for Liquid Crystal Displays

Transfer-printed, tandem microscale light-emitting diodes for full-color displays

Flexible full color organic light-emitting diode display on polyimide plastic substrate driven by amorphous indium gallium zinc oxide thin-film transistors

Mini-LED and Micro-LED: Promising Candidates for the Next Generation Display Technology

7-Inch Ink-jet Printing Flexible OLED Display with Narrow Bezel

Improved Indium Bumps Bonding Process Using Flexible Composite Structure Temporary Substrate for Micro-Led Display Applications

Active matrix monolithic micro‐LED full‐color micro‐display

3400 PPI Active-Matrix Monolithic Blue and Green Micro-LED Display

Flexible high-resolution micro-LED display device with integrations of transparent, conductive, and highly elastic hydrogel