Abstract:Research interest in thin-film transistor (TFT)-based flexible electronics for next-generation foldable and rollable displays is increasing, centering on flexible plastic substrates such as polyethylene terephthalate (PET), polyethylene naphthalate (PEN), and polyimide (PI). For flexible electronics using plastic substrates, it is important to select suitable semiconductor materials that can be deposited at low substrate temperature. Metal oxide (MO) semiconductors such as indium-gallium-zinc oxide (IGZO), zinc oxide (ZnO) are attracting attention as suitable candidates for plastic substrate electronics because of their higher mobility and optical transmittance than hydrogenated amorphous silicon (a-Si:H). In addition, since it can be processed at a lower temperature than low-temperature polysilicon (LTPS), it can be easily applied to flexible plastic substrates. One of the greatest advantages of MO is that it can be easily fabricated by conventional semiconductor processing methods such as sputtering, atomic laser deposition, and solution processes. Among them, solution-processed deposition method is particularly advantageous in terms of manufacturing efficiency because it does not require a separate vacuum system, and can efficiently utilize raw materials, so the fabrication cost is inexpensive. In particular, spray pyrolysis can guarantee environmental stability, high mobility, and large area production than other solution processes. In this work, we developed the high-performance, flexible a-IGZO/Al 2 O 3 TFTs using spray pyrolysis fabricated on the flexible PI substrate. In a previous study, we developed a method to reduce curling and electrostatic discharge (ESD) damage to PI substrates by using a mixture of carbon nanotubes (CNTs) and graphene oxide (GO) between carrier glass and PI substrate. Therefore, it was possible to mechanically detach the TFTs on PI substrate and handle them easily even after detachment. The spray-pyrolyzed Al 2 O 3 film is one of the high-k dielectric materials, which can lower the operating voltage, so the low-power consumption of the TFT backplane can be realized. The flexible spray-pyrolyzed a-IGZO/Al 2 O 3 TFT exhibits the field-effect mobility (μ FE ) of 9.75 cm 2 V −1 s −1 , threshold voltage (V TH ) of −0.8 V, subthreshold swing (SS) of 0.29 V dec −1 , and on/off current ratio of 6.2 × 10 7 . Even without TFT passivation layer, it shows environmental stability. The TFTs show robust electrical performance even under tensile strain with a bending radius of 1 mm. In addition, it showed stable electrical characteristics even in the repeated bending test of 30,000 cycles under compressive strain with a bending radius of 1 mm. This is due to fewer defects resulting from the smooth interface of the a-IGZO film and the Al 2 O 3 film deposited through spray pyrolysis. Therefore, spray-pyrolyzed a-IGZO/Al 2 O 3 TFT fabricated on PI substrate is a promising candidate for next-generation foldable display application. Figure 1

Flexible full color organic light-emitting diode display on polyimide plastic substrate driven by amorphous indium gallium zinc oxide thin-film transistors

81‐4: High Performance Coplanar Polycrystalline InGaO TFTs on Polyimide Substrate for Foldable AMOLED Display

Flexible Amorphous Indium-Gallium-Zinc Oxide Thin-Film Transistor with Aluminum Oxide Gate Insulator on Polyimide Substrate By Spray Pyrolysis for Foldable Display

Flexible IGZO Thin-Film Transistors and Inverter Circuits with Diode-Connected Transistors Fabricated on Transparent Polyimide Substrates

High-Performance Flexible a-IGZO TFTs Adopting Stacked Electrodes and Transparent Polyimide-Based Nanocomposite Substrates

High Performance Amorphous In0.5Ga0.5O Thin‐Film Transistor Embedded with Nanocrystalline In2O3 Dots for Flexible Display Application

(Invited) Short Channel Coplanar Amorphous-Indium-Gallium-Zinc-Oxide Thin-Film Transistors on Polyimide Substrate for High Resolution Displays

High-Performance Flexible Organic Light Emitting Diodes On Plastic Substrate

Fabrication And Characterization Of A-Igzo Thin Film Transistors On Smooth Printed Polyimide

Monolithic Integration of Semi-Transparent and Flexible Integrated Image Sensor Array with a-IGZO Thin-Film Transistors (TFTs) and p-i-n Hydrogenated Amorphous Silicon Photodiodes

31-Inch 4K Flexible Display Employing Gate Driver With Metal Oxide Thin-Film Transistors

Oxide-Semiconductor-Based TFTs for Displays and Flexible Electronics

Flexible Substrates with Polyimide Buffer Layers for Organic Light-Emitting Diodes

Stablity research and application of amorphous indium gallium zinc oxide tfts for active matrix organic light-emitting diode display

Highly Bendable In-Ga-ZnO Thin Film Transistors by Using a Thermally Stable Organic Dielectric Layer

Flexible TFT backplane development for extremely small bending radius with organic ILD and novel TFT structures

Polycrystalline InGaO Thin‐Film Transistors with Coplanar Structure Exhibiting Average Mobility of ≈78 cm2 V‐1 s‐1 and Excellent Stability for Replacing Current Poly‐Si Thin‐Film Transistors for Organic Light‐Emitting Diode Displays

DC and AC Performance of InGaZnO Thin-Film Transistors on Flexible PEEK Substrate

Oxide TFT with multilayer gate insulator for backplane of AMOLED device

Annealing-Induced Depletion-Mode Indium-Gallium-Zinc Oxide Thin-Film Transistor and Its Application to Active-Matrix Organic Light-Emitting Diode Display

Room-Temperature-Processed Flexible Amorphous InGaZnO Thin Film Transistor.