Abstract:Relationship between precipitation strengthening and creep resistance improvement has been an important topic for the widespread applications of magnesium alloys. Generally, static precipitation strengthening through thermal stable precipitates would generate satisfactory creep resistance. However, an opposite example is presented in this work and we propose that the size of precipitates plays a crucial role in controlling the operative creep mechanisms. In addition, the precipitate components along with their crystal structures in the crept Mg-4Al-3Sm-0.4Mn samples with/without pre-aging were thoroughly studied using Cs aberration-corrected high-angle annular dark-field scanning transmission electron microscopy (HAADF-STEM). Previous aging generates a large density of fine precipitates (< similar to 5 nm) homogeneously distributing in Mg matrix and exhibiting satisfactory strengthening effect. However, the number density of precipitate strings consisting of several or even dozens of relatively coarse precipitates (similar to 10 nm) was significantly decreased at the same time. As revealed in this work, the relatively coarse particles in Mg matrix are much more efficient than the fine precipitates in promoting dislocation climb. Therefore, the rate-controlling mechanisms are transferred from dislocation climb to dislocation slip after previous aging, thus leading to degradation of creep resistance. Moreover, there are mainly five types of precipitates/clusters, namely beta-(Al, Mg)(3)Sm, Al5Sm3, ordered Al-Sm cluster, ordered Al-Mn cluster and ordered/unordered AlMnSm clusters. The crystal structures of the former two precipitates were discussed and the formation mechanisms of the precipitates/clusters were revealed.

Unexpected deterioration on the creep resistance of Mg-8wt%Gd alloy via peak-aging treatment

Effects of solid solution and aging process on microstructure and mechanical properties of Mg-Gd-Y alloy

Effect of substituting Gd with 3 wt.% Nd on high temperature creep behaviors of peak-aged Mg-10Gd-0.4Zr casting Mg alloy

Enhancing the creep resistance of a dilute Mg-1.5 wt%Nd alloy plate via pre-compression and subsequent peak-aging

Tensile creep behaviors of Mg-10Gd-0.4Zr alloy in different heat treatment states

Abnormal creep behavior of Mg-12Gd-1MM-0.6Zr (wt.%) alloy at 300C

Tensile creep behaviors of Mg-10Gd-0.4Zr alloy under the different applied stresses at 260 °C

Abnormal creep behavior of Mg–12Gd–1MM–0.6Zr (wt.%) alloy at 300°C

Microstructural evolution of Mg–14Gd–0.4Zr alloy during compressive creep

Deformation modes and fracture behaviors of peak-aged Mg-Gd-Y alloys with different grain structures

Degraded Creep Resistance Induced by Static Precipitation Strengthening in High-Pressure Die Casting Mg-Al-Sm Alloy

Understanding solid solution strengthening at elevated temperatures in a creep-resistant Mg–Gd–Ca alloy

Adjustment of a Novel Β′-Type Precipitate in a Creep-Aged Mg−15 Wt%gd Alloy

Creep behavior and dynamic precipitation of highly heat-resistant Mg alloy with low rare-earth content

Opposite effects of Zn addition on the creep resistance at low and high temperatures for as-cast Mg-15Gd alloy

Effect of the precipitation state on high temperature tensile and creep behaviors of Mg-15Gd alloy

Microstructure and Mechanical Properties of Mg-Xy-1.5mm-0.4zr Alloys

Accelerating and decelerating effects of Gd content and peak-aging treatment on the grain growth of magnesium

High-Temperature Creep Behavior of Mg-9Gd-2Nd-1Ca-0.5Zr Alloy

Unveiling the Collaborative Effects of Static Precipitation and Precipitate-Free Zone on the Compressive Creep Behaviors of Mg-10.5wt%Y Binary Alloy

Achieving ultrahigh strength in pre-ageing-extruded Mg-Gd-Y-Zn-Mn alloys via ageing treatment