Abstract:Mg-Gd-Y-Zr alloy, as a typical magnesium rare-earth (Mg-RE) alloy, is gaining popularity in the advanced equipment manufacturing fields owing to their noticeable age-hardening properties and high specific strength. However, it is extremely challenging to prepare wrought components with large dimensions and complex shapes because of the poor room-temperature processability of Mg-Gd-Y-Zr alloy. Herein, we report a wire-arc directed energy deposited (DED) Mg-10.45Gd-2.27Y-0.52Zr (wt.%, GW102K) alloy with high RE content presenting prominent combination of strength and ductility, realized by tailored nanoprecipitates enabled by optimized heat treatment procedures. Specifically, the solution-treated sample exhibits excellent ductility with an elongation (EL) of 14.6 ± 0.1%, while the aging-treated sample at 200 °C for 58h achieves an ultra-high ultimate tensile strength (UTS) of 371 ± 1.5 MPa. Besides, the aging-treated sample at 250 °C for 16h attains a good strength-ductility synergy with an UTS of 316 ± 2.1 MPa and an EL of 8.5 ± 0.1%. Particularly, the evolution mechanisms of precipitation response induced by various aging parameters and deformation behavior caused by nanoprecipitates type were also systematically revealed. The excellent ductility resulted from coordinating localized strains facilitated by active slip activity, the ultra-high strength should be ascribed to the dense nano-β' hampering dislocation motion, while the shearable nano-β1 contributed to the good strength-ductility synergy. This work thus offers insightful understanding into the nanoprecipitates manipulation and performance tailoring for the wire-arc DED preparation of large-sized Mg-Gd-Y-Zr component with complex geometries.

Achieving ultrahigh strength in pre-ageing-extruded Mg-Gd-Y-Zn-Mn alloys via ageing treatment

Preparation of ultra-high strength Mg-Gd-Y-Zn-Zr alloy by pre-ageing treatment prior to extrusion

Effects of solid solution and aging process on microstructure and mechanical properties of Mg-Gd-Y alloy

Microstructure Evolution and Properties of Mg-9Gd-0.8Al Alloy with Lamellar Phase During Extrusion at Different Temperatures

Preparation of high-performance Mg-Gd-Y-Mn-Sc alloy by heat treatment and extrusion

Microstructure and Mechanical Properties of Mg-Xy-1.5mm-0.4zr Alloys

The Development of a High-Strength Mg-10.3Gd-4.4Y-0.9Zn-0.7Mn Alloy Subjected to Large Differential-Thermal Extrusion and Isothermal Aging

An alternating ageing-annealing process for enhancing strength and ductility of a Mg-Gd-Y-Zn-Zr alloy

Investigations on Microstructure and Mechanical Properties of Cast Mg-Gd-Y-Zn-Zr-Nd Alloy

Fabrication of magnesium alloy with high strength and heat-resistance by hot extrusion and ageing

Effects of pre-aging on microstructure evolution and deformation mechanisms of hot extruded Mg–6Zn–1Gd–1Er Mg alloys

A high-strength low-rare-earth-alloyed magnesium alloy via traditional hot-extrusion

Effect of Y on Age Hardening Response and Mechanical Properties of Mg-xY–1.5LPC −0.4zr Alloys

Effect of Zn Concentration on the Microstructures and Mechanical Properties of Extruded Mg–7Y–4Gd–0.4Zr Alloys

A Preliminary Study on the Effects of Aging Temperature on the Microstructure and Mechanical Properties of As-Extruded Mg-12Gd-4Y-1Zn Magnesium Alloy

Effect of heat treatment on mechanical properties and microstructure evolution of Mg-9.5Gd-4Y-2.2Zn-0.5Zr alloy

Microstructure and Mechanical Property of Mg-13Gd-0.2Ni Alloy Processed by Extrusion and Aging

Deformation modes and fracture behaviors of peak-aged Mg-Gd-Y alloys with different grain structures

Micro-Shear Bands and Their Enhancement on High Temperature Strength of Mg-Gd-Y-Zr Alloy

Microstructural evolution and enhanced mechanical properties of Mg–Gd–Y–Zn–Zr alloy via centrifugal casting, ring-rolling and aging

Revealing precipitation behavior and mechanical response of wire-arc directed energy deposited Mg-Gd-Y-Zr alloy by tailoring aging procedures