Abstract:Mg-Gd system alloys have been widely studied because they are applied in automotive, weaponry and aerospace applications and have a wide range of application scenarios due to the excellent strength and heat resistance properties. This work aims to systematically investigate the microstructure and high temperature mechanical properties of Mg-10Gd-3Y-xNd-0.5Zr alloy, and found that the microstructure of Mg-10Gd-3Y-0.5Zr alloy was mainly composed of a-Mg matrix, Mg5(Gd, Y) phase and Mg24(Y, Gd)5 phase. In which Nd element plays a role in the alloy to promote the precipitation phase precipitation and form the new phase Mg41Nd5, and the appropriate amount of Nd can refine the grain size. Moreover, Mg-10Gd-3Y-xNd-0.5Zr alloy has excellent mechanical properties in room and high temperature, with ultimate tensile strengths above 280 MPa at 200 degrees C-300 degrees C, 309 MPa at 250 degrees C, and especially at 350 degrees C, the tensile strength is still up to 195 MPa. The main strengthening phases are p" phase, p' phase and 18-LPSO (Long-period stacking ordered) phase. The Mg-10Gd-3Y-2Nd-0.5Zr alloy has excellent high temperature creep resistance at (200 degrees C-300 degrees C)/(50-90 MPa). When creeping at 200 degrees C, p' phase is completely transformed into p" phase. After creeping at 250 degrees C, p' phase is transformed into p phase. After creeping at 300 degrees C, p phase grows significantly. Meanwhile, when the creep temperature and stress increase, the creep mechanism gradually changes from diffusion and grain boundary sliding mechanism to dislocation slip and dislocation climbing mechanism. (c) 2023 The Author(s). Published by Elsevier B.V. This is an open access article under the CC BY-NC-ND license (http://creativecommons.org/licenses/by-nc-nd/4.0/).

Opposite effects of Zn addition on the creep resistance at low and high temperatures for as-cast Mg-15Gd alloy

Effect of zinc additions on the microstructure mechanical properties and creep behavior of as-cast Mg–3Sm–0.4Zr (wt.%) alloy

Effect of Zinc Addition on Microstructure and Mechanical Properties of Mg–7Y–3Sm–0.5Zr Alloy

Effect of substituting Gd with 3 wt.% Nd on high temperature creep behaviors of peak-aged Mg-10Gd-0.4Zr casting Mg alloy

Effects of Alloying Elements on Creep Properties of Mg-Gd-Zr Alloys

The Microstructure and Mechanical Properties of As-cast Mg-10Gd-3Y-xZn-0.6Zr (x=0, 0.5, 1 and 2 Wt%) Alloys

Tensile creep behaviors of Mg-10Gd-0.4Zr alloy in different heat treatment states

Microstructural evolution of Mg–14Gd–0.4Zr alloy during compressive creep

Tensile Creep Behavior and Microstructure Evolution of Mg-11Gd-2Y-0.5Zr Alloy

Creep behavior and dynamic precipitation of highly heat-resistant Mg alloy with low rare-earth content

Investigations on Microstructure and Mechanical Properties of Cast Mg-Gd-Y-Zn-Zr-Nd Alloy

Enhancing Strength and Creep Resistance of Mg–Gd–Y–Zn–Zr Alloy by Substituting Mn for Zr

Effect of Zn Addition on the Microstructure and Mechanical Properties of Cast Mg–10Gd–3.5Er– X Zn–0.5Zr Alloys

Microstructure and high temperature mechanical properties of the Mg-Gd-Y(-Nd)-Zr alloy

Evolution Process of Precipitate-Free Zones in a Mg-Gd Alloy During Creep

Effect of the precipitation state on high temperature tensile and creep behaviors of Mg-15Gd alloy

Exceptional increase in the creep life of magnesium rare-earth alloys due to localized bond stiffening

Effect of Dynamic Precipitation on Creep Behavior of Mg-5zn-2al(-2y) Alloy

Effect of Initial Temper on the Creep Behavior of a Mg–Gd–Nd–Zr Alloy

Mechanical Properties and Creep Behavior of Mg-Gd-Y-Zr Alloys

Influence of Thermal and Thermo-Mechanical Processing on the Creep Resistance of Mg-10Gd-3Y-0,4Zr Alloy