Microstructural evolution of Mg–14Gd–0.4Zr alloy during compressive creep
Hui Shi,Yuanding Huang,Lixiang Yang,Chunquan Liu,Hajo Dieringa,Chong Lu,Lv Xiao,Regine Willumeit-Römer,Norbert Hort
DOI: https://doi.org/10.1016/j.jma.2023.09.005
IF: 11.813
2023-10-11
Journal of Magnesium and Alloys
Abstract:Highlights • Dynamic precipitate evolutions affect the creep property of Mg-Gd-Zr alloys. • Precipitate chains distribute along single direction as creep proceeding. • PFZs widening reduces creep property of Mg alloys during creep. The present work reports the creep behavior and microstructural evolution of the sand-cast Mg–14Gd–0.4Zr alloy (wt.%) prepared by the differential pressure casting machine. Their compressive creep tests at 250 °C were performed under various applied stresses (i.e., 60, 80 and 100 MPa). Among them, the sand-cast Mg–14Gd–0.4Zr samples examined under 250 °C/80 MPa for 39 and 95 h, respectively, were chosen to systemically analyze their creep mechanisms using high-angle annular dark field-scanning transmission electron microscopy (HAADF-STEM). The obtained results showed that the enhancement of creep resistance can be mainly attributed to the coherent β' and β' F phases with an alternate distribution, effectively impeding the basal dislocations movement. However, with the creep time increasing, the fine β'+β' F precipitate chains coarsened and transformed to semi-coherent β 1 phase and even to large incoherent β phase (surrounded by precipitate-free areas) in grain interiors. The precipitate-free zones (PFZs) at grain boundaries (GBs) were formed, and they could expand during creep deformation. Apart from the main cross-slip of basal and prismatic dislocations, type dislocations were activated and tended to distribute near the GBs. The aforementioned phenomena induced the stress concentrations, consequently leading to the increment of the creep strain.
metallurgy & metallurgical engineering