Compressive creep behavior of extruded Mg-4Sm-2Yb-0.6Zn-0.4Zr alloy
Dongdong Zhang,Shuo Yang,Fanzhi Meng,Zheng Tian,Hong Xu,Zhanyi Cao,Jian Meng
DOI: https://doi.org/10.1016/j.msea.2021.140929
2021-03-01
Abstract:<p>A high-strength Mg-4Sm-2Yb-0.6Zn-0.4Zr extruded alloy with bimodal microstructure was creep tested in compression at temperatures of 200 °C and 225 °C under applied stress in the range of 120 to 200 MPa. The creep curves of the alloy are dominated by a steady-state creep stage and a transient primary creep stage. An abnormal decrease of creep rate is observed in the later period of the steady-state creep stage, particularly the creep at high stress levels more significant, and the underlying reasons are proposed. Moreover, the alloy exhibits high stress exponents (<em>n</em> = 8.7 at 200 ºC and <em>n</em> = 7.4 at 225 ºC) and activation energies ranging from 225 kJ/mol to 310 kJ/mol. It is shown that the high stress exponents can be well rationalized by the commonly adopted threshold stress method in this work, which results in the modified stress exponents near 5, suggesting five power law, with some indicator of dislocation creep. Transmission electron microscopic observations revealed that cross-slip of <<em>a</em>> dislocations is the dominant creep mechanism in recrystallized grains, while cross-slip of <<em>c</em> + <em>a</em>> dislocations is operative in hot-worked grains. Besides, a fraction of γ" phase in hot-worked regions was transformed to γ' phase during creep while not in recrystallized regions, thus coexistence of γ" and γ' in hot-worked regions. Also, these γ-typed phases play an important role in creep of the studied alloy. Finally, the studied alloy owns better creep resistance than those of benchmark Mg alloys such as AE and AX series alloys.</p>
materials science, multidisciplinary,nanoscience & nanotechnology,metallurgy & metallurgical engineering