Abstract:As one of the most promising electronic devices in the post-Moore era, nanoscale vacuum field emission transistors (VFETs) have garnered significant attention due to their unique electron transport mechanism featuring ballistic transport within vacuum channels. Existing research on these nanoscale vacuum channel devices has primarily focused on structural design for logic circuits. Studies exploring their application potential in other vital fields, such as sensors based on VFET, are more limited. In this study, for the first time, the design of a vacuum field emission transistor (VFET) coupled with a piezoelectric microelectromechanical (MEMS) sensing unit is proposed as the artificial mechanoreceptor for sensing purposes. With a negative threshold voltage similar to an N-channel depletion-mode metal oxide silicon field effect transistor, the proposed VFET has its continuous current tuned by the piezoelectric potential generated by the sensing unit, amplifying the magnitude of signals resulting from electromechanical coupling. Simulations have been conducted to validate the feasibility of such a configuration. As indictable from the simulation results, the proposed piezoelectric VFET exhibits high sensitivity and an electrically adjustable measurement range. Compared to the traditional combination of piezoelectric MEMS sensors and solid-state field effect transistors (FETs), the piezoelectric VFET design has a significantly reduced power consumption thanks to its continuous current that is orders of magnitude smaller. These findings reveal the immense potential of piezoelectric VFET in sensing applications, building up the basis for using VFETs for simple, effective, and low-power pre-amplification of piezoelectric MEMS sensors and broadening the application scope of VFET in general.

A MEMS-Type Ionization Vaccum Sensor Based on an On-Chip Thermionic Electron Source

A MEMS-Type Ionization Vacuum Sensor with a Wide Measurement Range

A Miniature Ionization Vacuum Sensor With a SiO<sub>x</sub>-Based Tunneling Electron Source

Wafer-Scale Fabricated MEMS-type Ionization Vacuum Sensors Based on Through Glass Via Technology

A Miniaturized Ionization Vacuum Sensor Based on Thermionic Electron Emission From Carbon Nanotubes

A MEMS-Type Hot-cathode Ionization Gauge With Carbon Nanotube-based Electron Emitters

An On-Chip Nanoscale Vacuum Sensor Based on Electroformed Silicon Oxide

Wafer-scale Fabricated On-Chip Thermionic Electron Sources Based on a Suspended Y2O3/TiN Filament

Piezo-VFETs: Vacuum Field Emission Transistors Controlled by Piezoelectric MEMS Sensors as an Artificial Mechanoreceptor with High Sensitivity and Low Power Consumption

A Sensitivity-Enhanced Vertical-Resonant MEMS Electric Field Sensor Based on TGV Technology

A vacuum sensor using field emitters made by multiwalled carbon nanotube yarns

A MEMS Thermopile Pirani Sensor Integrated With Composite Nanoforests for Vacuum Monitoring in Semiconductor Equipment

A Highly Sensitive and High-Resolution Resonant MEMS Electrostatic Field Microsensor Based on Electrostatic Stiffness Perturbation

Miniature vacuum sensor based on gas adsorptions from carbon nanotube field emitters

An On-Chip Vacuum Triode Based on Thermionic Electron Emission from Super-Aligned Carbon Nanotube Films

From Ceramic Tube to Microcantilever: A New Strategy for Low Power, Fast Heating and High Integrated Metal Oxide Semiconductor Gas Sensor

A Composite-Type MEMS Pirani Gauge for Wide Range and High Accuracy

Compact M z atomic magnetometer with a thick silicon core MEMS vapor cell

Surface Micromachined CMOS-MEMS Pirani Vacuum Gauge With Stacked Temperature Sensor

Gas-Sensing Performance of Core-shell SnO2-based Chemiresistive MEMS Sensor for H2S Detection under Vacuum

An On-chip Vacuum Transistor Based on a Multiwalled Carbon Nanotube*