Abstract:Atomic magnetometers (AMs) that use alkali vapors, such as rubidium, are among the most sensitive sensors for magnetic field measurement. They commonly use polarization differential detection to mitigate common-mode noise. Nevertheless, traditional differential detection optics, including polarization beam splitters (PBS) and half-wave plates, are typically bulky and large, which restricts further reductions in sensor dimensions. In this study, a combination of liquid crystal polarization grating (LCPG) and liquid crystal quarter-wave plate is used for differential detection in AMs, with magnetic field strength determined by measuring the intensity of two diffracted beams from the LCPG. The experimental findings indicate that the fabricated LCPG exhibits a circularly polarized extinction ratio of 3,656 and achieves an average diffraction efficiency of 99 %. In addition, the differential detection method based on LCPG can achieve an angular resolution of 1.48 × 10 −7 rad. Subsequently, the method is employed in an AM to achieve an average magnetic sensitivity of 13.8 fT/Hz 1/2 . Compared to the PBS-based differential detection method, this method enhances the magnetometer response coefficient by 13 % and achieves co-side distribution of the two diffracted beams, thereby avoiding the need for additional vertical optical paths. The effective thickness of the detection optics is reduced to the micrometer scale, allowing for future integration as thin films onto microfabricated vapor cells. This study offers a practical solution for miniaturized AMs with exceptionally high sensitivity.

Compact M z atomic magnetometer with a thick silicon core MEMS vapor cell

Three Dimensional Compensation Spherical Coils for Compact Atomic Magnetometers

Microfabricated Shaped Rubidium Vapor Cell for Miniaturized Atomic Magnetometers

Mz Atomic Magnetometer Using A 3D Mems Glass Alkali Vapor Cell with Vertical Sidewalls

Microfabricated Vapor Cells with Chemical Polishing and Two-Step Low-Temperature Anodic Bonding for Single-Beam Magnetometer

Atomic Magnetometer with Microfabricated Vapor Cells Based on Coherent Population Trapping

Integration of the SERF Magnetometer and the Mz Magnetometer Using Micro-Fabricated Alkali Vapor Cell

Integration of Micro-Fabricated Scalar Magnetometer with the Combination of Mx and Mz Techniques

Ultrasensitive SERF atomic magnetometer with a miniaturized hybrid vapor cell

Magnetocardiography Measurements by Microfabricated Atomic Magnetometer With a 3-D Spherical Alkali Vapor Cell

Magnetic Gradient Measurement Using Micro-Fabricated Shaped Rubidium Vapor Cell

Subpicotesla scalar atomic magnetometer with a microfabricated cell

Micro-fabricated spherical rubidium vapor cell and its integration in 3-axis atomic magnetometer

Molded Foaming 3D MEMS Vapor Cell for Weak Magnetic Detection

Ultra-compact and high-precision differential detection method based on liquid crystal polarization grating for miniature atomic magnetometer

Characterization of 87Rb MEMS vapor cells for miniature atomic magnetometers

Improvement of Sensitivity by Using Microfabricated Spherical Alkali Vapor Cells for Chip-Scale Atomic Magnetometers

Monolithically Integrated 3D Atomic Chip for Quantum Optical Magnetometry

Microfabricated SERF Atomic Magnetometers for Measurement of Weak Magnetic Field

Simultaneous Excitation Of Rb-85 And Rb-87 Isotopes Inside A Microfabricated Vapor Cell With Double-Rf Fields For A Chip-Scale M-Z Magnetometer

Characterization of <SUP>87</SUP>Rb MEMS vapor cells for miniature atomic magnetometers