Abstract:As one of the leading photovoltaic materials, Cu(In,Ga)(Se,S)(2) has two distinct advantages over other candidates. First, its conduction band and valence band could be independently tuned by adjusting the Ga/(Ga + In) and S/(S + Se), respectively. Next, its composition distribution could be feasibly tuned by controlling the thin film deposition process. These merits have been utilized in fabricating the Cu(In,Ga)(Se,S)(2) solar cells with world record efficiency. However, these features have not yet been satisfactorily simulated. In order to understand the mechanism of high-performance Cu(In,Ga)(Se,S)(2) solar cells, we obtained the tunable bandgap of absorber layer and suitable conduction band offset between absorber layer and buffer layer via Ga and S concentration and gradient, by combining both first-principle calculations and numerical simulations with Poisson equation and the continuity equation. In particular, compared with other photovoltaic materials, the bandgap of Cu(In,Ga)(Se, S)(2) could be tuned flexibly across the layer thickness to realize spatial energy band optimization with doubleconcentration-grading absorber. The efficiency of 23.29% was obtained based on theoretical calculations and numerical simulations, which is almost the same as the reported result, in the considerations of (i) optimum bandgap of absorber, (ii) band energy offset, (iii) double (Ga- and S-) concentration grading, and (iv) low defect density in the absorber layer. In addition, we obtained a Cu(In,Ga)(Se,S)(2) solar cell with a high S content uniform band gap efficiency of 23.53%. Therefore, we provided an understanding for tunable engineered band energy research in high-efficient Cu(In,Ga)(Se,S)(2) solar cells.

Silver (ag) Substitution in Cu(In,Ga)Se2 Solar Cell: Insights into Current Challenges and Future Prospects

Silver-assisted Optimization of Band Gap Gradient Structure of Cu(In,Ga)Se2 Solar Cells Via SCAPS

Improved sequentially processed Cu(In,Ga)(S,Se)2 by Ag alloying

Growth of (Ag,Cu)(In,Ga)Se2 Absorbers under Band Gap Variation and Characterization with a Focus on Optical Spectroscopy

High Efficiency CIGS Solar Cells by Bulk Defect Passivation through Ag Substituting Strategy.

10.3%-Efficient Submicron-Thick Cu(In,Ga)Se2 Solar Cells with Absorber Fabricated by Sputtering In2Se3, CuGaSe2 and Cu2Se Targets

Preparation and Characterization of Cuins2 Thin Films for Solar Cells by Chemical Bath Deposition

Influences of Sulfurization on Performances of Cu(In,Ga)(Se,S)2 Cells Fabricated Based on the Method of Sputtering CIGSe Quaternary Target

Research progress on synthesis of CuIn 1-xGa xSe 2 nanoparticles

Research Development of Cu(In,Ga)Se_2 Based(cigs) Solar Cells

Hybrid Density Functional Theory Study of Cu(In1−xGax)Se2 Band Structure for Solar Cell Application

Cu(In,Ga)Se2-based Solar Cells Prepared from Se-containing Precursors

The Impact of Ga and S Concentration and Gradient in Cu(In,Ga)(Se,S)2 Solar Cells

Interface Engineering for High-Efficiency Solution-Processed Cu(In,Ga)(S,Se)2 Solar Cells via a Novel Indium-Doped CdS Strategy

Substitution of Ag for Cu in Cu2ZnSn(S,Se)4: Toward Wide Band Gap Absorbers with Low Antisite Defects for Thin Film Solar Cells

Cesium Modulation in Cu(In, Ga)(S, Se) 2 Solar Cells: Comprehensive Analysis on Interface, Surface, and Grain Boundary

Silver sulfide thin film solar cells: materials, fabrication methods, devices, and challenges

Thin‐Film Solar Cells of an Indium‐Modified Silver Antimony Sulfide Selenide Absorber Prepared by Spray Pyrolysis

Cu(In,Ga)Se-2 Solar Cells Fabricated by Sputtering from Copper-Poor and Selenium-Rich Ceramic Target with Selenium-Free Post Treatment

Influences of Ga Concentration on Performances of CuInGaSe2 Cells Fabricated by Sputtering-Based Method with Ceramic Quaternary Target