Abstract:Cu(In,Ga)Se<sub>2</sub> (CIGS) solar cells attract intense interest both in research and industry fields due to their high power conversion efficiencies, low costs, and high stabilities. The power conversion efficiency of a CIGS solar cell is limited by the deep level defects distributed on the surface and in the bulk of the CIGS solar cells. In this work, we elucidate that the deep level defects are significantly suppressed during the CdS buffer layer deposition process via a chemical bath deposition (CBD) method. The X-ray photoelectron spectroscopy results show the incorporation of cadmium (Cd) into CIGS during the CdS deposition process, which is the main reason for the reduced deep level nonradiative recombination defects. Raman spectroscopy and secondary ion mass spectroscopy further reveal the reduction of nonradiative recombination deep level defects due to Cd incorporation. Besides, the high-resistivity i-ZnO layer provides field-effect passivation, leading to the enhancement of the power conversion efficiency from 11.0 to 12.1%. By a combination of the incorporation of Cd, i-ZnO passivation, and optimization of the band gap of CIGS, the champion power conversion efficiency of the CIGS solar cell is as high as 15.5% without an antireflective layer and alkali metal postdeposition treatment. Our results provide insights into the effect of the CdS buffer layer, CBD method, and high-resistivity i-ZnO layer on the performance of CIGS solar cells, which is quite helpful to further improve the power conversion efficiency of CIGS solar cells.The Supporting Information is available free of charge at <a class="ext-link" href="/doi/10.1021/acsaem.0c01930?goto=supporting-info">https://pubs.acs.org/doi/10.1021/acsaem.0c01930</a>.CIGS coevaporation deposition process; CdS CBD deposition; characterizations; top-view SEM images of CdS deposited via chemical bath deposition for different times; XRD pattern of CdS fabricated via a CBD method at 80 °C for 12 min; parameters for the simulations of the performance of CIGS solar cells with different thicknesses of i-ZnO; and EQE curves of CIGS solar cell obtained at 0, 0.5, −0.5, and 1 V DC voltage bias (<a class="ext-link" href="/doi/suppl/10.1021/acsaem.0c01930/suppl_file/ae0c01930_si_001.pdf">PDF</a>)This article has not yet been cited by other publications.

High Efficiency CIGS Solar Cells by Bulk Defect Passivation through Ag Substituting Strategy.

Silver-assisted Optimization of Band Gap Gradient Structure of Cu(In,Ga)Se2 Solar Cells Via SCAPS

Impact of Cation Substitution in (Ag x Cu 1− x ) 2 ZnSnSe 4 Absorber‐Based Solar Cells toward 10% Efficiency: Experimental and Theoretical Analyses

Efficiency Enhancement of CIGS Solar Cells via Recombination Passivation

Substitution of Ag for Cu in Cu2ZnSn(S,Se)4: Toward Wide Band Gap Absorbers with Low Antisite Defects for Thin Film Solar Cells

Efficiency improvement for post-sulfurized CIGS solar cells enabled by in situ Na doping

Synergistic Effect of Ag, Sb Dual‐Cation Substitution on Cu2ZnSn (S, Se)4 High‐Efficiency Solar Cells

Reforming Material Chemistry of CIGS Solar Cells Via a Precise Ag Doping Strategy

Defect Engineering in Earth‐Abundant Cu2ZnSn(S,Se)4 Photovoltaic Materials Via Ga3+‐Doping for over 12% Efficient Solar Cells

Strategies to Enhance the Performance of Cu(In,Ga)(S,Se)2 Thin-Film Solar Cells by Doping Approaches

Ag Incorporation with Controlled Grain Growth Enables 12.5% Efficient Kesterite Solar Cell with Open Circuit Voltage Reached 64.2% Shockley–Queisser Limit

Analyzing the synergistic effect of Ag and Ge co-incorporation on Cu2ZnSnSe4 thin-film solar cells

Passivation of Deep-Level Defects by Cesium Fluoride Post-Deposition Treatment for Improved Device Performance of Cu(In,Ga)Se2 Solar Cells.

Interface Engineering for High-Efficiency Solution-Processed Cu(In,Ga)(S,Se)2 Solar Cells via a Novel Indium-Doped CdS Strategy

Passivation of Deep‐Level Defects through Chemical Environment Regulation for Efficient CZTSSe Solar Cells Based on Active Selenium Adsorption–Desorption Process

Origin of Reduced Efficiency in Cu(In,Ga)Se Solar Cells With High Ga Concentration: Alloy Solubility Versus Intrinsic Defects

Optimization of CuInGaSSe properties and CuInGaSSe/CdS interface quality for efficient solar cells processed with CuInGa precursors

Insertion of the AGS Layer at the CIGSe/ITO Interface: A Way to Reduce the Formation of the GaOx Interfacial Phase in CIGSe Solar Cells

10.3%-Efficient Submicron-Thick Cu(In,Ga)Se2 Solar Cells with Absorber Fabricated by Sputtering In2Se3, CuGaSe2 and Cu2Se Targets

Eliminating the Excess CuxSe Phase in Cu-rich Cu(In,Ga)Se2 by In2Se3 Treatment

CdS Induced Passivation toward High Efficiency and Stable Planar Perovskite Solar Cells