Abstract:In this paper, a wideband absorptive filtering power divider (AFPD) which features the characteristics of high selectivity and flat output distributions is proposed. It is composed of one unequal width three-coupled line (TCL), two coupled lines (CLs), two stepped open-circuited stubs, two kinds of isolation resistors, and two types of absorptive branches. The design equations of the proposed AFPD are derived using an even-odd decomposition method, and parametric investigations are also performed. It is found that the passband bandwidth can be adjusted by the stepped open-circuited stub which generates two transmission zeros (TZs). By combining the TCL with the CLs, the passband bandwidth is effectively enlarged. In addition, two isolated resistors are utilized for achieving good isolation and output-port matching performance. Without affecting the passband responses, the input port absorptive feature within the whole frequency band can be obtained by loading the absorptive branches both on the input and output ports. For validation, an example operating at the center frequency of 2 GHz was modeled and tested. Results exhibit that the passband FBW reaches 72% under 1 dB criterion, which illustrates flat output port distributions. In addition, for 10 dB return loss, the input and output impedance matching bandwidths are 250% and 78%, respectively. The features of good filtering responses are demonstrated by realizing the rectangle coefficient of 1.24 and the out-of-band suppression of more than 20 dB.

High Selectivity Filtering Power Divider Based on SAW Resonator

Design of Compact Wideband Filtering Power Divider with Extended Isolation and Rejection Bandwidth

Dual-Band Filtering Power Divider Using Dual-Resonance Resonators with Ultrawide Stopband and Good Isolation

Design of Filtering Power Divider with High Frequency Selectivity

A New Wideband Filtering Power Divider Based on Rectangle Patch Resonator with Compact Size

Wideband filtering power divider based on D-CRLH resonator

Wide-Stopband Bandpass-Filtering Power Divider With High-Frequency Selectivity

Packaged Filtering Power Divider with High Selectivity, Extended Stopband and Wideband Isolation

Filtering Power Divider with Good Output Balance and Unsymmetrical Structure

Self-Packaged Mm-Wave Broadband Air-Filled SIW Filtering Power Divider with Sharp Roll-Off Skirt and High In-Band Isolation

Reconfigurable Dual-Band Filtering Power Divider with Ultra-Wide Stopband Using Hybrid Microstrip/Square Defected Ground Structure

A Millimeter-Wave Filtering Power Divider Based on Rectangular SIW Resonator

A Dual-Band Balanced-To-Balanced Power Divider With High Selectivity And Wide Stopband

Compact 4.0–5.1 GHz Filtering Power Divider with Low Insertion Loss and Wide Stopband Using RC-Loaded Coupled SIDGS Resonators

Synthesis of Wideband All-Frequency Absorptive Filtering Power Divider with High Selectivity and Flat Output Port Distributions

A Miniaturized Filtering Power Divider With High Selectivity and Wide Stopband Based on 3D Heterogeneous Integration Technology

A Wideband Substrate Integrated Waveguide Filtering Power Divider

Frequency-Tunable Nonreciprocal SIW Filtering Power Divider Using a Common Resonator With Mixed Static and Time-Modulated Degenerate Modes

A 3.4–7.4-Ghz Filtering Power Divider with Wide Stopband and Low Radiation Loss Using Triple-Mode Hybrid Microstrip/SIDGS Resonator

A mmWave Waveguide Filtering Power Divider Based on SSPP-RWG Structure

Wideband Microstrip Filtering Power Divider Designed by Direct Synthesis Technique (DST)