Abstract:This article presents an ultrawideband dual-bandpass frequency-selective surface (FSS) that exhibits outstanding transmission characteristics and a miniaturization feature in the required frequency band. In order to obtain a dual-band filtering response, initially, a specific topological structure of a dual-band bandpass microwave filter is theoretically investigated, and using periodic structures with capacitive, inductive, or resonant-type surface impedances synthesizes its components. Subsequently, employing a compact cascaded hybrid resonant element to construct the FSS, which is composed of convoluted strip grids (CSGs), convoluted square rings (CSRs), and square rings arranged on different layers. In addition, an accurate equivalent circuit model (ECM) is constructed to analyze the working mechanism of the proposed FSS. Finally, the designed FSS is made and measured. The results indicate that the designed FSS achieved -3-dB bandwidths of 105.4% from 1.01 to 3.26 GHz and 47.8% from 3.75 to 6.10 GHz, respectively. At the center frequency of the first passband, the FSS's size is as compact as 0.056 lambda(0 )x 0.056 lambda(0) . The test results obtained are in good agreement with the results of the full-wave simulation and show excellent resonant stability with respect to different polarizations and incident angles up to 45 degrees.

Bandpass Frequency Selective Surface with Two Sharp Sidebands Based on Shunted Quarter‐mode Substrate Integrated Waveguide Cavities

A Bandpass Frequency Selective Surface With a Low Cross-Polarization Based on Cavities With a Hybrid Boundary

A Novel Dual-Band Frequency Selective Surface (FSS)

Wideband and Wide-Angle FSS Using Loop Slotted Hybrid Quarter-Mode Substrate Integrated Cavity With Two Independently Controllable Poles

Four-band Frequency Selective Surface Based on Quarter-Mode Substrate Integrated Waveguide Technology

Frequency Selective Surface with Miniaturized Elements Based on Quarter-Mode Substrate Integrated Waveguide Cavity with Two Poles

Dual-band Frequency Selective Surface with Quasi-Elliptic Bandpass Response

A Dual-Polarized Bandpass Frequency Selective Surface With Stable Response

A Novel Frequency Selective Surface with Smaller Size and Wide Band

Design of wideband bandpass frequency selective surface based on the patch resonators and substrate integrated waveguide cavities

Wide‐angle Band‐pass FSS with High‐frequency Selectivity Based on SIW Cavity Technology

A Quad-Band Highly Selective Frequency Selective Surface with Ultra-Wideband Rejection

Filtenna-Filtenna Design for Broadband and High-Selectivity Frequency Selective Surface

A Novel Angularly Stable Wide Passband Frequency Selective Surface

Narrowband Frequency Selective Surface Based on Substrate Integrated Waveguide Technology

A Miniaturized Ultra-Wideband Dual Bandpass Frequency Selective Surface with High Selectivity

A Miniaturized Ultrawideband Dual-Bandpass Frequency-Selective Surface With High Selectivity

A Novel Miniaturized Multiband Strong Coupled-FSS Structure Insensitive to Almost All Angles and All Polarizations

High Roll-Off Frequency Selective Surface With Quasi-Elliptic Bandpass Response

X-band Frequency Selective Surface with Low Loss and Angular Stability

An Ultrawideband Three-Dimensional Bandpass Frequency Selective Surface