Abstract:The advent of 6G wireless networks necessitates a synergistic design approach for sensing, communication, and protection, highlighting the capability of systems to function in transition between wideband transmission, narrowband transmission, and wideband reflection. This study introduces a novel trifunctional active frequency selective surface (TA-FSS) for this scenario. Compared with the conventional structures that can only realize frequency tuning or mode switching, this design has the versatility to switch the bandwidth of the passband and operate in three distinct modes: wideband communication mode with a passband of 18.9% relative bandwidth, narrowband tunable sensing mode with a tunable passband of 3.4% relative bandwidth and 37.9% relative tuning range, and a wideband protection mode with a reflection band from 1 to 5 GHz. First, a novel approach is devised to facilitate the passband width modulation at a consistent frequency through the established equivalent circuit model and verified through a single-polarized TA-FSS prototype. Afterward, based on a quasi-symmetric design methodology, a dual-polarized TA-FSS is achieved with a periodicity of 0.09 lambda and thickness of 0.018 lambda . The dual-polarized TA-FSS is angular stable up to 45(degrees) and polarization insensitive. A physical prototype of the envisioned FSS is constructed for experimental evaluation. The measured results are closely aligned with the theoretical predictions.

BANDPASS FREQUENCY SELECTIVE SURFACE WITH SHARP SIDEBANDS FOR 5G ELECTROMAGNETIC SHIELDING OF FIXED SATELLITE SYSTEM IN C-BAND

Bandpass Frequency Selective Surface with Two Sharp Sidebands Based on Shunted Quarter‐mode Substrate Integrated Waveguide Cavities

A Low-Profile Broadband Bandpass Frequency Selective Surface with Two Rapid Band Edges for 5G Near-Field Applications

A Trifunctional Active Frequency Selective Surface for 6G Shielding Applications

A Novel Dual-Band Frequency Selective Surface (FSS)

A 2.5-D Angularly Stable Frequency Selective Surface Using Via-Based Structure for 5G EMI Shielding

A Bandpass Frequency Selective Surface With a Low Cross-Polarization Based on Cavities With a Hybrid Boundary

A Novel Miniaturized Multiband Strong Coupled-FSS Structure Insensitive to Almost All Angles and All Polarizations

Design of Highly Selective Ultrawideband FSS Based on Deep Learning for EMI Shielding in 5G Bands

A Novel 3-D Frequency Selective Structure for Radiation Leakage Suppression in Sub-6G Highly Integrated Package

A Novel Angularly Stable Wide Passband Frequency Selective Surface

A Quad-Band Highly Selective Frequency Selective Surface with Ultra-Wideband Rejection

A closely spaced dual band polarization insensitive FSS for 5G applications

Filtenna-Filtenna Design for Broadband and High-Selectivity Frequency Selective Surface

Design of a Novel 2.5-Dimensional Wideband Frequency Selective Surface with Stable Perfomance for Fifth Generation Communications

A Tunable Band-pass FSS Structure for 5G Applications

A Novel FSS for 5G Applications with Low in-Band Insertion Loss

22/43 GHz low-insertion-loss dual-polarized multi-layer bandpass frequency selective surfaces for millimeter astronomy

Design of Miniaturized Frequency Selective Rasorber Based on Complementary Bandpass FSS for 5G Applications

A compact polarization independent stop band frequency‐selective surface for WLAN shielding

A broadband second-order bandpass frequency selective surface for microwave and millimeter wave application