Abstract:This article introduces a hybrid 3-D frequency selective structure (FSS) that offers high stopband suppression and low insertion loss to mitigate pattern degradation resulting from the mutual coupling of co-aperture array antennas. Traditional 2-D FSSs exhibit good passband performance but lack cross-coupling between resonators, making it difficult to achieve strong stopband suppression at a lower frequency. In contrast, traditional 3-D FSSs provide strong stopband suppression, but the vertical structures pose challenges for impedance matching, leading to high passband loss and poor angular stability. The FSS proposed in this article combines the advantages of both 2-D and 3-D FSSs. It introduces transmission zeros by combining a vertical surface with a cross-shaped metal strip on the foundational 2-D passband FSS. This design significantly enhances the stopband suppression capability of the FSS at the frequencies of interest without compromising the low insertion loss performance in the passband. Simulation results indicate that the proposed 3-D FSS achieves a -10 dB stopband within the frequency range of 1.2 to 2.93 GHz, with a stopband suppression of -16 dB at 2.7 GHz. Furthermore, the average insertion loss within the passband frequency range of 3.3-3.8 GHz remains low, staying below 0.23 dB. The FSS's transmission response remains stable under oblique incidences ranging from 0 degrees to 60 degrees. The operating principle of the FSS is elucidated using an equivalent circuit model. A prototype FSS is fabricated and experimentally characterized for validation. The measured results align with the simulated ones, confirming the FSS's high stopband suppression, low insertion loss, and excellent angular stability, making it a viable solution for mitigating pattern degradation in co-aperture array antennas.

A Novel FSS for 5G Applications with Low in-Band Insertion Loss

A Novel Dual-Band Frequency Selective Surface (FSS)

A Novel 3-D Frequency Selective Structure for Radiation Leakage Suppression in Sub-6G Highly Integrated Package

A Low-Profile Broadband Bandpass Frequency Selective Surface with Two Rapid Band Edges for 5G Near-Field Applications

A novel FSS structure with high selectivity and excellent angular stability for 5G communication radome

Design of a Novel 2.5-Dimensional Wideband Frequency Selective Surface with Stable Perfomance for Fifth Generation Communications

A Novel 3-D Frequency Selective Surface With Ultrawide Passband and High Selectivity

BANDPASS FREQUENCY SELECTIVE SURFACE WITH SHARP SIDEBANDS FOR 5G ELECTROMAGNETIC SHIELDING OF FIXED SATELLITE SYSTEM IN C-BAND

A closely spaced dual band polarization insensitive FSS for 5G applications

A Novel Miniaturized Multiband Strong Coupled-FSS Structure Insensitive to Almost All Angles and All Polarizations

A Novel Angularly Stable Wide Passband Frequency Selective Surface

A Novel Miniaturized Dual-Stop-Band Fss for Wi-Fi Application

A Hybrid 3-D Frequency Selective Structure Featuring Enhanced Stopband Suppression and Reduced Insertion Loss

Design of Highly Selective Ultrawideband FSS Based on Deep Learning for EMI Shielding in 5G Bands

Bandpass Frequency Selective Surface with Two Sharp Sidebands Based on Shunted Quarter‐mode Substrate Integrated Waveguide Cavities

A Novel Miniaturized Strong-Coupled FSS Structure with Excellent Angular Stability

A Novel Miniaturized Dual-band Frequency Selective Surface

A Bandpass Frequency Selective Surface With a Low Cross-Polarization Based on Cavities With a Hybrid Boundary

A Novel FSS for High/Low Frequency Band Beam Transparent Scanning/Grounding

A 2.5-D Angularly Stable Frequency Selective Surface Using Via-Based Structure for 5G EMI Shielding

A Trifunctional Active Frequency Selective Surface for 6G Shielding Applications