Abstract:The advent of 6G wireless networks necessitates a synergistic design approach for sensing, communication, and protection, highlighting the capability of systems to function in transition between wideband transmission, narrowband transmission, and wideband reflection. This study introduces a novel trifunctional active frequency selective surface (TA-FSS) for this scenario. Compared with the conventional structures that can only realize frequency tuning or mode switching, this design has the versatility to switch the bandwidth of the passband and operate in three distinct modes: wideband communication mode with a passband of 18.9% relative bandwidth, narrowband tunable sensing mode with a tunable passband of 3.4% relative bandwidth and 37.9% relative tuning range, and a wideband protection mode with a reflection band from 1 to 5 GHz. First, a novel approach is devised to facilitate the passband width modulation at a consistent frequency through the established equivalent circuit model and verified through a single-polarized TA-FSS prototype. Afterward, based on a quasi-symmetric design methodology, a dual-polarized TA-FSS is achieved with a periodicity of 0.09 lambda and thickness of 0.018 lambda . The dual-polarized TA-FSS is angular stable up to 45(degrees) and polarization insensitive. A physical prototype of the envisioned FSS is constructed for experimental evaluation. The measured results are closely aligned with the theoretical predictions.

A closely spaced dual band polarization insensitive FSS for 5G applications

A Novel Dual-Band Frequency Selective Surface (FSS)

A Low-Profile Broadband Bandpass Frequency Selective Surface with Two Rapid Band Edges for 5G Near-Field Applications

BANDPASS FREQUENCY SELECTIVE SURFACE WITH SHARP SIDEBANDS FOR 5G ELECTROMAGNETIC SHIELDING OF FIXED SATELLITE SYSTEM IN C-BAND

A Novel Miniaturized Multiband Strong Coupled-FSS Structure Insensitive to Almost All Angles and All Polarizations

A Bandpass Frequency Selective Surface With a Low Cross-Polarization Based on Cavities With a Hybrid Boundary

A Novel FSS for 5G Applications with Low in-Band Insertion Loss

A 2.5-D Angularly Stable Frequency Selective Surface Using Via-Based Structure for 5G EMI Shielding

A Trifunctional Active Frequency Selective Surface for 6G Shielding Applications

A Dual-Band Polarization-Insensitive Frequency Selective Surface for Electromagnetic Shielding Applications

A novel FSS structure with high selectivity and excellent angular stability for 5G communication radome

A compact polarization independent stop band frequency‐selective surface for WLAN shielding

A Novel Multi-Band Polarization Insensitive Frequency Selective Surface Based on Centrosymmetric L-Shaped Metal Strips

A Novel Miniaturized Dual-band Frequency Selective Surface

A Dual-Band Dual-Polarization Frequency Selective Surface with Wide-Range Flexible Band Ratio and Wide Angular Stability

Design and validation of a novel 2.5‐D miniaturized FSS with angular and superior polarization stability for mobile technology

A Novel 3-D Frequency Selective Structure for Radiation Leakage Suppression in Sub-6G Highly Integrated Package

Design of a Novel 2.5-Dimensional Wideband Frequency Selective Surface with Stable Perfomance for Fifth Generation Communications

Design of polycarbonate‐based dual‐band conformal frequency‐selective surface for 4G/5G shielding applications

A Dual-Band Frequency Selective Surface with Close Band Spacing and Miniaturized Response

A Dual-Passband Frequency Selective Surface with High Angular Stability and Polarization Insensitivity