Abstract:The work presents the ultra‐miniaturized multi‐band Frequency Selective Surface with a vent hole for shielding wireless communication bands such as LTE, Bluetooth, and Wi‐Fi applications. It operates as a spatial filter at 800 MHz, 2.45 GHz, and 5 GHz with a 10 dB bandwidth of 523 MHz, 687 MHz, and 725 MHz, respectively. The FSS, with an ultra‐miniaturized footprint of 0.024λօ along with a vent of 0.01λօ, exhibits a high angular stability of 75օ for transverse electric (TE) and transverse magnetic (TM) modes. Summary A novel single‐layer ultra‐miniaturized multi‐band Frequency Selective Surface (FSS) with a circular vent is designed for shielding LTE and ISM bands. The top layer of the proposed FSS unit cell incorporates a circular patch along with convoluted arms. The designed FSS unit cell exhibits band‐rejection characteristics with a resonance of 800 MHz, 2.45 GHz, and 5 GHz and bandwidths of 523 MHz, 687 MHz, and 725 MHz, respectively. The periodicity of an ultra‐miniaturized FSS unit cell is 0.024λօ x 0.024λօ, encompassing a spatial vent hole of 0.01λօ, where λօ corresponds to the lowest operating frequency. Moreover, the proposed FSS unit cell remains unaltered angular stability up to 75° with less than 1% frequency deviation in TE and TM modes. Good polarization insensitivity for the designed four‐fold symmetrical FSS unit cell is achieved. Further, an Equivalent Circuit Model (ECM) analysis is developed to infer the physical insight of the proposed FSS unit cell. The FSS prototype is measured for the assertion, and the good agreement between the findings from simulation and measurement is validated. For real‐time assertion, the FSS prototype is verified using the Amitech SDR04. Thus, FSS is a promising candidate with good ventilation for shielding the LTE, Bluetooth, and Wi‐Fi application bands.

Design of polycarbonate‐based dual‐band conformal frequency‐selective surface for 4G/5G shielding applications

A Trifunctional Active Frequency Selective Surface for 6G Shielding Applications

A compact polarization independent stop band frequency‐selective surface for WLAN shielding

Conformal ultra‐miniaturized frequency selective surface for medical shielding applications

An X-band conformal FSS with enhanced shielding effectiveness

BANDPASS FREQUENCY SELECTIVE SURFACE WITH SHARP SIDEBANDS FOR 5G ELECTROMAGNETIC SHIELDING OF FIXED SATELLITE SYSTEM IN C-BAND

A Novel Dual-Band Frequency Selective Surface (FSS)

A Novel 3-D Frequency Selective Structure for Radiation Leakage Suppression in Sub-6G Highly Integrated Package

A closely spaced dual band polarization insensitive FSS for 5G applications

A Dual-Band Polarization-Insensitive Frequency Selective Surface for Electromagnetic Shielding Applications

A Monolayer Frequency‐Selective Surface for Wideband Shielding Application with Adequate Out‐of‐Band Separation and Angular Stability

A Novel Ultra-Miniaturized Angularly Stable Frequency Selective Surface for L-Band Shielding Applications

A 2.5-D Angularly Stable Frequency Selective Surface Using Via-Based Structure for 5G EMI Shielding

Filtenna-Filtenna Design for Broadband and High-Selectivity Frequency Selective Surface

A Low-Profile Broadband Bandpass Frequency Selective Surface with Two Rapid Band Edges for 5G Near-Field Applications

Design of a Novel 2.5-Dimensional Wideband Frequency Selective Surface with Stable Perfomance for Fifth Generation Communications

Polarization Insensitive and Transparent Frequency Selective Surface for Dual Band GSM Shielding

A Novel Angularly Stable Wide Passband Frequency Selective Surface

A Novel Miniaturized Multiband Strong Coupled-FSS Structure Insensitive to Almost All Angles and All Polarizations

Design of Highly Selective Ultrawideband FSS Based on Deep Learning for EMI Shielding in 5G Bands

An ultra‐miniaturized single‐layer multiband frequency selective surface with vent for wireless communication