Abstract:Compared with silicon and silicon carbide devices, the unique electrical and structural characteristics of gallium nitride high electron mobility transistors (GaN HEMTs) make them have different requirements for power module integration. This article proposes a novel integration scheme for the high-voltage lateral GaN HEMT dies without bonding wires. Based on the proposed integration scheme, a compact 650 V/30 A GaN power module with low parasitic parameters and high thermal performance is designed. The GaN dies are sandwiched between two ceramic substrates to improve thermal performance and ensure consistent thermal expansion coefficients. The multiple copper layer structure is used to increase wiring flexibility to reduce parasitic parameters. The design of gate and power loop layouts is discussed, and the common-mode (CM) capacitance is optimized. A comprehensive reliability evaluation is also carried out for this integration scheme. Finally, a double-sided cooling 650 V/30 A full-bridge GaN power module with 2.4 cm×1.3 cm×0.17 cm is fabricated. The thermal resistance is reduced by 30%–48% compared with the conventional single-sided cooling module. The power loop and gate loop inductances are reduced to 0.94 nH and 2 nH, respectively, and the CM capacitance is limited to 2.5 pF. The maximum dv/dt of the drain–source voltage is high as 150 V/ns with only 10% overshoot. Based on the power module, a 3.3-kW two-phase interleaved buck converter is developed. It has 820 W/in3 power density and 98.85% peak efficiency.

Monolithically Integrated Power Converter Based on Etching-Free P-Gan HEMTs by Hydrogen Plasma Treatment Technology

A 2–10 MHz GaN HEMTs Half-Bridge Driver with Bandgap Reference Comparator Clamping and Dual Level Shifters for Automotive Applications

Hydrogen Plasma Treated p-GaN Gate HEMTs Integration for DC-DC Converter

Ultra-Low Inductance Design for A Gan Hemt Based 3L-Anpc Inverter

A GaN HEMT Integrated Power Module with Silver Sintering Processes

GaN Power IC Technology on P-Gan Gate HEMT Platform

A 3-D Integrated Power Module of GaN HEMTs Based on Silver Sintering Processes

GaN Power Integration Technology and Its Future Prospects

Planar GaN Power Integration - The World is Flat

An 8A 998A/inch<SUP>3</SUP> 90.2% Peak Efficiency 48V-to-1V DC-DC Converter Adopting On-Chip Switch and GaN Hybrid Power Conversion

Recent Advances in GaN‐Based Power HEMT Devices

A Gallium Nitride Integrated Power Module with Ultra-low Parasitic Inductances and Thermal Resistance

Integrated gate-protected HEMTs and mixed-signal functional blocks for GaN smart power ICs

A GaN Power Integration Platform Based on Engineered Bulk Si Substrate with Eliminated Crosstalk Between High-Side and Low-Side HEMTs

650-V GaN-on-Si Power Integration Platform Using Virtual-Body p-GaN Gate HEMT to Screen Substrate-Induced Crosstalk

A Monolithic GaN Power Stage with Common-Mode Transient Immunity and Negative Voltage Operation Design for High Frequency Power Converters

A Compact Double-Sided Cooling 650V/30A GaN Power Module With Low Parasitic Parameters

Monolithic Integration of Gate Driver and Protection Modules with P-GaN Gate Power HEMTs

A CMOS-Compatible Process for ≥3 kV GaN Power HEMTs on 6-inch Sapphire Using In Situ SiN as the Gate Dielectric

Design and Optimization of Gate Driver Integrated Multichip 3-D GaN Power Module

GaN Monolithic Digital Units on P-GaN Platform