Abstract:Internet-of-Things (IoT) applications require nW-power current references that are robust to process, voltage and temperature (PVT) variations, to maintain the performance of IoT sensor nodes in a wide range of operating conditions. However, nA-range current references are rarely area-efficient due to the use of large gate-leakage transistors or resistors, which occupy a significant silicon area at this current level. In this paper, we introduce a nA-range constant-with-temperature (CWT) current reference, relying on a self-cascode MOSFET (SCM) biased by a four-transistor ultra-low-power voltage reference through a single-transistor buffer. The proposed reference includes a temperature coefficient (TC) calibration mechanism to maintain performance across process corners. In addition, as the proposed design relies on the body effect, it has been fabricated and measured in 0.11-$\mu$m bulk and 22-nm fully-depleted silicon-on-insulator (FD-SOI) to demonstrate feasibility in both technology types. On the one hand, the 0.11-$\mu$m design consumes a power of 16.8 nW at 1.2 V and achieves a 2.3-nA current with a line sensitivity (LS) of 2.23 %/V at 25°C and a TC of 176 ppm/°C at 1.2 V from -40 to 85°C. On the other hand, the 22-nm design consumes a power of 16.3 nW at 1.5 V and achieves a 2.5-nA current with a 1.53-%/V LS at 25°C and an 82-ppm/°C TC at 1.5 V from -40 to 85°C. Thanks to their simple architecture, the proposed references achieve a silicon area of 0.0106 mm$^2$ in 0.11 $\mu$m and 0.0026 mm$^2$ in 22 nm without compromising other figures of merit, and are thus competitive with state-of-the-art CWT references operating in the same current range.

Design and Analysis of a Family of Pw-Level Sub-1V CMOS VRGs by Stacking a Current-Source Transistor and a Resistive-Load Transistor

New Technique: A Low Drift Current Reference Based on PMOS Temperature Correction Technology.

A Sub-1-V Nanopower MOS-Only Voltage Reference

A Family of Current References Based on 2T Voltage References: Demonstration in 0.18-$μ$m with 0.1-nA PTAT and 1.1-$μ$A CWT 38-ppm/$^\circ$C Designs

A 0.7‐V 7.4‐nW 6.4‐ppm/°C CMOS Subthreshold Voltage Reference With Temperature Compensation Circuit

A 1.65‐nW 11.14‐ppm/°C self‐biased subthreshold CMOS voltage reference with temperature compensation circuit

A 0.79 pJ/K-Gate, 83% Efficient Unified Core and Voltage Regulator Architecture for Sub/Near-Threshold Operation in 130 nm CMOS

Investigation of Candidate VRM Topologies for Future Microprocessors

CMOS voltage reference based on weighted ΔVGS

A CMOS Voltage Reference Based on Mutual Compensation of Vtn and Vtp

Design of Voltage–Current Reference Source in CMOS Technology

A High-PSRR and Curvature-Compensated Subthreshold Voltage Reference Without Special Devices or Resistors

A New Cmos Current Reference with High Order Temperature Compensation

A sub-1 V 115nA 0.35μm CMOS voltage reference for ultra low-power applications

Novel CMOS Current Reference with High Power-Supply Rejection Ratio

Sub-1V CMOS Voltage Reference Based on Weighted Vgs

A 2.5-nA Area-Efficient Temperature-Independent 176-/82-ppm/°C CMOS-Only Current Reference in 0.11-$μ$m Bulk and 22-nm FD-SOI

A Low-Voltage All-Metal Oxide Semiconductor Voltage Reference with Ultra-Low Power

A Novel Low-power Low-voltage Reference

Analysis of Using Negative Capacitance FETs to Optimize Linearity Performance for Voltage Reference Generators

A 0.5 V, 650 Pw, 0.031%/V Line Regulation Subthreshold Voltage Reference