Abstract:In this article, for the first time, we explained a detailed physical insight for negative differential resistance (NDR) to positive differential resistance (PDR) transition in a ferroelectric (FE)-based negative capacitance (NC) FET and also its dependence on the device terminal voltages. Using extensive well-calibrated TCAD simulations, we have investigated this phenomenon on fully depleted silicon on insulator (FDSOI)-NCFET. The NDR-to-PDR transition occurs due to FE layer capacitance changes from a negative to positive state during channel pinchoff. This, in turn, results in a valley point in the output characteristic ( IDS - VDS ) at which the output resistance is infinite. We also found that we could alter the valley point location by modulating the vertical electric field through the FE layer in the channel pinchoff region using body bias ( VBB ). The interface oxide charges also impacted the NDR to PDR transition, and a positive interface charge results in faster NDR to PDR transition. Furthermore, we have utilized the modulation in the NDR-to-PDR transition due to VBB for designing a current mirror. Results show that the output current ( IOUT ) variation due to VDS reduces from ~8% to ~2% with VBB . We have also designed a single-stage common source (CS) amplifier and provided design guidelines to achieve a higher gain in the NDR region. The results obtained using a small-signal model of the FDSOI-NCFET demonstrate that ~25% higher gain can be achieved with the discussed design guidelines in the NDR region compared to the transition region of IDS - VDS . We have also explored the device scaling effect on the amplifier gain and found that ~ 2.23× gain can be increased with smaller channel length and higher device width.

Analysis of Using Negative Capacitance FETs to Optimize Linearity Performance for Voltage Reference Generators

A Novel Fully On-Chip CMOS Low-Dropout Linear Regulator with Ultra Low Noise

Delay and Power Evaluation of Negative Capacitance Ferroelectric Mosfet Based on Spice Model

Utilization of Negative-Capacitance FETs to Boost Analog Circuit Performances

The Investigation of Negative Capacitance Vertical Nanowire FETs Based on SPICE Model at Device-Circuit Level

Investigation of negative differential resistance on negative capacitance Germanium source vertical TFET

Strain Tuning on Van Der Waals Negative Capacitance Transistors

Ferroelectric Negative Capacitance Field Effect Transistor

NCFET Based Logic for Energy Harvesting Systems

Performance Evaluation of Negative Capacitance Reconfigurable Field Effect Transistor for Sub 10 Nm Integration

Analysis of DIBL Effect and Negative Resistance Performance for NCFET Based on a Compact SPICE Model

Enabling Energy-Efficient Nonvolatile Computing with Negative Capacitance FET

Negative Capacitance Junctionless FinFET for Low Power Applications: An Innovative Approach

A novel negative quantum capacitance field-effect transistor with molybdenum disulfide integrated gate stack and steep subthreshold swing for ultra-low power applications

Physical Investigation of Subthreshold Swing Degradation Behavior in Negative Capacitance FET

Negative-to-Positive Differential Resistance Transition in Ferroelectric FET: Physical Insight and Utilization in Analog Circuits

Influence of Body Effect on Sample-and-Hold Circuit Design Using Negative Capacitance FET

Field Effect Transistors: Ferroelectric Negative Capacitance Field Effect Transistor (Adv. Electron. Mater. 11/2018)

Circuit Level Implementation of Negative Capacitance Source Pocket Double Gate Tunnel FET for Low Power Applications

Negative Capacitance as Digital and Analog Performance Booster for Complementary MOS Transistors

Beyond Moore's law – A critical review of advancements in negative capacitance field effect transistors: A revolution in next-generation electronics