Abstract:In recent years, the development of the Internet of Things (IoT) has prompted the search for nA-range current references that are simultaneously constrained to a small area and robust to process, voltage and temperature variations. Yet, such references have remained elusive, as existing architectures fail to reach a low temperature coefficient (TC) while minimizing silicon area. In this work, we propose a nA-range constant-with-temperature (CWT) peaking current reference, in which a resistor is biased by the threshold voltage difference between two transistors in weak inversion. This bias voltage is lower than in conventional architectures to cut down the silicon area occupied by the resistor and is obtained by forward body biasing one of the two transistors with an ultra-low-power voltage reference so as to reduce its threshold voltage. In addition, the proposed reference includes a circuit to suppress the leakage of parasitic diodes at high temperature, and two simple trimming mechanisms for the reference current and its TC. As the proposed design relies on the body effect, it has been validated in both 0.11-$\mu$m bulk and 22-nm fully-depleted silicon-on-insulator, to demonstrate feasibility across different technology types. In post-layout simulation, the 0.11-$\mu$m design generates a 5-nA current with a 65-ppm/°C TC and a 2.84-%/V line sensitivity (LS), while in measurement, the 22-nm design achieves a 1.5-nA current with an 89-ppm/°C TC and a 0.51-%/V LS. As a result of the low resistor bias voltage, the proposed references occupy a silicon area of 0.00954 mm$^2$ in 0.11 $\mu$m (resp. 0.00214 mm$^2$ in 22 nm) at least 1.8$\times$ (resp. 8.2$\times$) smaller than fabricated nA-range CWT references, but with a TC improved by 6.1$\times$ (resp. 4.4$\times$).

New Technique: A Low Drift Current Reference Based on PMOS Temperature Correction Technology.

A Low Drift Curvature-Compensated Bandgap Reference with Trimming Resistive Circuit

A current reference based on bandgap technology with wide input voltage range by using 0.18µm BCD process

Novel CMOS Current Reference with High Power-Supply Rejection Ratio

Super Performance CMOS Band-Gap Voltage Reference

A 2.2ppm/°c Compensated Bandgap Voltage Reference with a Double-Ended Current Trimming Technique.

A New Cmos Current Reference with High Order Temperature Compensation

Bandgap Voltage Reference Design with Enhanced Tolerance of Process Variations

A 0.9-V high-PSRR bandgap with self-cascode current mirror

An Untrimmed BJT-Based Temperature Sensor with Dynamic Current-Gain Compensation in 55-Nm CMOS Process

A 30na Temperature-Independent CMOS Current Reference and Its Application in an LDO

A resistorless CMOS current reference with temperature compensation

A nA-Range Area-Efficient Sub-100-ppm/°C Peaking Current Reference Using Forward Body Biasing in 0.11-$μ$m Bulk and 22-nm FD-SOI

All CMOS Temperature, Supply Voltage and Process Independent Current Reference

A 1.1- / 0.9-nA Temperature-Independent 213- / 565-ppm/$^\circ$C Self-Biased CMOS-Only Current Reference in 65-nm Bulk and 22-nm FDSOI

Design and Implementation of Reference Current Source Based on Deep Submicron Technology

A digital compensation technique for a current reference in an ultra-wide temperature range

A 2.5-nA Area-Efficient Temperature-Independent 176-/82-ppm/°C CMOS-Only Current Reference in 0.11-$μ$m Bulk and 22-nm FD-SOI

Design of a Low Temperature Drift On-Chip Power Supply Module Circuit with Nonlinear Temperature Curvature Compensation

A Simple structure with low temperature drift bandgap voltage reference design

A Novel Digital Compensation Technique for Current Bias Without Additional Power Consumption