Abstract:A simple triple-branch current reference with high power-supply rejection ratio(PSRR) was proposed to enhance the accuracy and stability of current reference of CMOS integrated circuits. Using Kirchhoff's current and voltage law(Kvl,Kcl) and partial differential equations,the small-signal models of conventional and cascade current references were compared with that of the triple-branch current reference,and the PSRRS of these three circuits are solved.The results showed that the PSRR performances of conventional and cascade current references were confined due to the positive feedback loop of node voltage in them,while the triple-branch current reference has a much higher PSRR due to the strong negative feedback loop of node voltage.First order temperature compensation is also adopted in the triple-branch current reference to provide temperature stability.Using CSMC 0.5 μm process,simulation showed that when the input voltage was 1.5~5.0 V,the triple-branch current reference's PSRR reached -77.9 dB,apparently better than those of conventional and cascade current references;and temperature drift within range of-20~120 ℃ was below 255×10-6/℃,which is adequate for most applications.

A Novel Digital Compensation Technique for Current Bias Without Additional Power Consumption

New Technique: A Low Drift Current Reference Based on PMOS Temperature Correction Technology.

A digital compensation technique for a current reference in an ultra-wide temperature range

A Novel Ultra Low Noise CMOS Voltage Reference Circuit with Digital Calibration Scheme

A current reference based on bandgap technology with wide input voltage range by using 0.18µm BCD process

A Novel High PSR Voltage Reference with Secondary Temperature Compensation

Novel CMOS Current Reference with High Power-Supply Rejection Ratio

An Untrimmed BJT-Based Temperature Sensor with Dynamic Current-Gain Compensation in 55-Nm CMOS Process

A New Cmos Current Reference with High Order Temperature Compensation

Current Reference with Temperature Compensation for Low Power Applications

A Novel Curvature-Compensated High Accuracy CMOS Bandgap Reference

A resistorless CMOS current reference with temperature compensation

Design and Implementation of Reference Current Source Based on Deep Submicron Technology

A Curvature Compensation Technique for Low-Voltage Bandgap Reference

A Novel CMOS Current Mode Bandgap Reference

A Resistorless Low-Power Voltage Reference With Novel Curvature-Compensation Technique

Calibration technique tracking temperature for current-steering digital-to-analog converters

A 1.8-V 0.7 Ppm/Degrees C High Order Temperature-Compensated Cmos Current Reference

A New 1-V Second-Order Temperature-Compensated Current Reference

Current Reference with Low Temperature Drift and Low Power Supply

A Bandgap Reference Design with Novel Curvature Compensation