Abstract:Purpose - Titanium alloy has the excellent performance and been widely utilized in aeroengine and airframe manufacture. However, improving the understanding of all aspects of titanium alloy is necessary. The purpose of this paper is to investigate the tribological properties of two typical titanium alloys against tungsten carbide under dry friction.Design/methodology/approach - Reciprocating ball-disc friction tests were carried out at room temperature in different loading without lubricant to investigate the friction properties of TA19/WC-Co and TC18/WC-Co friction pairs. The influence of the load on the friction coefficient and friction force was analyzed. The worn surfaces of TA19 and TC18 specimens were observed by the digital microscopy and scanning electron microscopy (SEM). And the wear mechanism was discussed.Findings - The results show that the friction coefficients decreased with the increase in the normal load. However, the reduction in the friction coefficient for the TC18 alloy was less than that for the TA19 alloy. The dynamic friction forces with time were not quite coincident with the variation trend of the friction coefficients during the sliding friction. The results observed by the SEM and EDS revealed that several grooving were the main type of frictional wear causing the surfaces of the TA19 and TC18 alloys.Originality/value - It is shown in the paper that the tribological property of TA19 alloy was better than that of TC18 when sliding against tungsten carbide under the dry friction conditions. The main types of damage to the TA19/WC-Co friction pair were the ploughing, the delamination fatigue associate with abrasive wear and some diffusive wear. The ploughing and abrasion were the main wear mechanisms for the surface of TC18 alloy.

Study on Dry Friction and Wear Properties of TiAl Alloy

Dry sliding wear of MA/PM Al-10Ti alloy

Microstructure and Sliding Wear Behavior of PM Alloy Al10Ti after Thermal Exposure

Study on Dry Sliding Friction and Wear Properties of Ti2AlN/TiAl Composite

Dry Friction Characteristics of Ti-6Al-4V Alloy under High Sliding Velocity

Study on Sliding Dry Friction Properties of TiNi/Ti_2Ni Modified Layer on TC4 Alloy under Different Loads

Wear and Frictional Behavior of Copper Modified Ti-6Al-4V Alloy

Dry sliding wear of PM Al-10Ti alloy

Study On Friction Behavior Of Tib2/Al Composites

Contributions of the Particulate Reinforcement to Dry Sliding Wear Resistance of Rapidly Solidified Al-Ti Alloys

Effect of the Micro-Structure Evolution of Friction Layer on the Sliding Tribology Behavior of TiAl-10 Wt.% Ag at 16 N-0.5 M/s

Dry Sliding Wear Behavior Of Hot-Dip Aluminized Ti-6al-4v Alloy Against Gcr15 Steel

Dry Sliding Wear Behavior of Ti-6Al-4V Alloy in Air

Study On The Tribological Properties Of Titanium Alloys Sliding Against Wc-Co During The Dry Friction

Correlation between the characteristics of the thermo-mechanical mixed layer and wear behaviour of Ti–6Al–4V alloy

Dry-Sliding Tribological Properties of TiAl Alloys and Ti 2 AlN/TiAl Composites at High Temperature

Dry Sliding Wear Behavior of Hot-Dip Aluminized Ti-6Al-4V Alloy As a Function of Sliding Velocity

Friction And Wear Performance Of Different Forming Surfaces Of Ti6al4v Alloy Formed By Selective Laser Melting

The Relationships Between Tribological Behaviour and Heat-Transfer Capability of Ti6Al4V Alloys

Microstructural Characteristics And Elevated Temperature Wear Of Ti-11si-16al Alloy

Investigation of Friction and Wear Behavior of NiAl-based Alloys at Room Temperature