Abstract:Forming suitable oxide scales on the surface of T91 steel by controlling the oxygen concentration has been considered as an effective method to restrain the liquid metal corrosion of T91 steel exposed to lead-bismuth eutectic (LBE). Notably, the successful precondition of this method is that the oxide scales on T91 steel can not be damaged easily, especially in flowing LBE environment. In the present study, laser surface remelting (LSR) treatment is employed to enhance the damage resistance of oxide scales on T91 steel under the flowing (∼3 m/s) oxygen-saturated LBE conditions at 500 °C. The experimental results reveal that although the T91 steel specimens subjected to LSR treatment still process a double-layered oxide scales comprising an outer magnetite layer and an inner Fe-Cr spinel layer, their damage resistance ability is remarkably stronger compared the as-received T91 steel specimens in flowing LBE environment. Further observations indicate that such phenomenon should be ascribed to fewer microstructural defects, such as LBE-filled holes within the oxide scales, resulting from the refined microstructure and high density of dislocations activated in LSR specimens. Accordingly, the possible reasons behind these phenomena were proposed, and a corresponding damage model of oxide scales in flowing LBE condition was established.

New Insights into Oxidation Mechanism and Kinetics of 9cr–1mo Ferritic-Martensitic Steel in Oxygen-Saturated Liquid Lead-Bismuth Eutectic

Influence of temperature on the microstructural evolution of SIMP and T91 steels in liquid lead-bismuth eutectic: Experiments and molecular dynamics simulations

Corrosion behaviour of 11Cr1Si ferritic/martensitic steel in static liquid lead-bismuth eutectic at 450-550 °C

Corrosion Kinetics of T91 Steel under Low Oxygen Conditions (10-7 Wt% O) in Lead-Bismuth Eutectic at 500 ºc

Corrosion kinetics of T91 steel under low oxygen conditions (10 −7 wt% O) in lead-bismuth eutectic at 500 °C

Understanding the surface oxide evolution of T91 ferritic-martensitic steel in supercritical water through advanced characterization

Oxidation behavior of ferritic/martensitic steels in stagnant liquid LBE saturated by oxygen at 600°C

Effects of laser surface remelting on damage resistance of oxide scales on T91 exposed to flowing oxygen-saturated lead-bismuth eutectic

Revealing the Oxidation Mechanism of Ferritic Heat Resistant Steel in High-Temperature Flue Gas

A synergy of different corrosion failure modes pertaining to T91 steel impacted by extreme lead–bismuth eutectic flow pattern

Corrosion Kinetics and Mechanisms of 15-15Ti Steel in Flowing Liquid Lead-Bismuth Eutectic at 500°C

Comparison investigation on corrosion of SIMP and T91 exposed to liquid LBE at 450°C: the role of Si on reducing oxidation rate

Stress Corrosion Behavior of T91 Steel in Static Lead–bismuth Eutectic at 480 °C

Fretting behavior of oxide scale formed on ferritic/martensitic steel after pre-exposure to lead-bismuth eutectic

Influence of Si addition on the corrosion behavior of 9Cr ferritic/martensitic steel in static liquid lead-bismuth eutectic

Effect of Surface Mechanical Attrition Treatment on Microstructure and Oxidation Behavior in T91 Steel at High Temperature

Precipitation Behavior of Laves Phase in the Vicinity of Oxide Film of Ferritic Stainless Steel: Selective Oxidation-Induced Precipitation

New insights into the oxidation mechanisms of a Ferritic-Martensitic steel in high-temperature steam

PULMONARY INFILTRATE, HEMOPTYSIS, AND SEVERE ANEMIA.

Synergy of stress and corrosion in a 12Cr ferritic/martensitic steel exposed to static liquid lead-bismuth eutectic at 550°C

Formation and disappearance of an internal oxidation zone in the initial stage of the steam oxidation of Fe–9Cr–0.26Si ferritic steel