Abstract:An ultrafine-structured FeCoCrNiMn high-entropy alloy (HEA) was produced by severe cold rolling (SCR) with a 95 pct reduction, and the effect of annealing temperature over a wide range from 573 K to 1373 K (300 °C to 1100 °C) on the microstructure and mechanical properties of this SCRed HEA was systematically investigated. The results show that the microstructure of the single-phase FCC HEA after SCR is greatly refined and mainly comprises ultrafine crystalline, high-density dislocation cell and networks, which substantially improve the hardness and strength. The SCRed HEA starts to recrystallize at an annealing temperature of 773 K (500 °C) and is fully recrystallized at 973 K (700 °C) after 1 hours. The σ phases with a tetragonal structure form upon annealing at 773 K (500 °C), leading to a further enhancement in hardness and strength for the annealed HEA compared to the SCRed HEA. The average grain size remains below 500 nm when the SCRed HEA is annealed at 923 K (650 °C) for 1 hours, indicating that the ultrafine-structured HEA after SCR and subsequent annealing treatment possesses excellent microstructural thermal stability. The SCRed HEAs annealed at 923 K and 973 K (650 °C and 700 °C) exhibit excellent high strength–ductility combinations due to the formation of the fully recrystallized ultrafine-grained microstructure. The strain-rate sensitivity parameter (m value) with different grain sizes, from ultrafine to coarse, was evaluated by strain-rate jump tests. The m value of the HEA increases monotonically with increasing grain size and annealing temperature. Moreover, high-temperature tensile tests demonstrated that the annealed HEAs exhibit superplastic deformation behavior at 973 K and 1073 K (700 °C and 800 °C), and the formation of a Cr-rich phase is found during high-temperature deformation. It is believed that the plastic deformation facilitates the phase decomposition of fine-grained HEAs and grain boundary sliding is the key mechanism of high-temperature deformation.

Achieving Ultrafine Lamellar Structure and Exceptional Electrochemical Properties of Fe35Mn27Ni28Co5Cr5 High-Entropy Alloy Through Severe Cold Rolling Process

Ultrahigh Cryogenic Strength and Exceptional Ductility in Ultrafine-Grained CoCrFeMnNi High-Entropy Alloy with Fully Recrystallized Structure

Effects of cold rolling and annealing treatment on microstructure and properties of CoFeNiMnV high‐entropy alloys

Effect of Annealing Temperature on Microstructure and Mechanical Properties of a Severe Cold-Rolled FeCoCrNiMn High-Entropy Alloy

Microstructure and Properties of Bulk Al0.5CoCrFeNi High-Entropy Alloy by Cold Rolling and Subsequent Annealing

Studying the Effect of Cold Rolling and Heat Treatment on the Microstructure and Mechanical Properties of the Fe36Mn20Ni20Cr16Al5Si3 High Entropy Alloy

Effect of Annealing on Microstructure and Mechanical Properties of an Ultrafine-Structured Al-containing FeCoCrNiMn High-Entropy Alloy Produced by Severe Cold Rolling

Effect of Annealing Treatment on the Heterogeneous Microstructure and Properties of Cold-Rolled FeCoCrNiMn High-Entropy Alloy

Microstructures and properties of Fe1.25CoNi1.25CrxAl0.25 high-entropy alloys after cold-rolling and annealing

Development of ultrafine grained cobalt-free AlCrFe2Ni2 high entropy alloy with superior mechanical properties by thermo-mechanical processing

Corrosion Behavior of Cold-Rolled and Solution-Treated Fe36Mn20Ni20Cr16Al5Si3 HEA in Different Acidic Solutions

Fine tuning in-sync the mechanical and magnetic properties of FeCoNiAl0.25Mn0.25 high-entropy alloy through cold rolling and annealing treatment

Effect of cold working and annealing on microstructure and properties of powder metallurgy high entropy alloy

Microstructural evolution, mechanical and corrosion behavior of an Al7.5Co20.5Fe24Ni24Cr24 high‐entropy alloy

Revealing the relationship between microstructures, textures, and mechanical behaviors of cold-rolled Al0.1CoCrFeNi high-entropy alloys

Improvement of the corrosion performance of a cold-rolled Co40Cr20Ni30Al5Ti5 high-entropy alloy by adjusting annealing treatments

Microstructural Evolution and Mechanical Properties of Al0.5CoCrFeNi High-Entropy Alloy after Cold Rolling and Annealing Treatments

Microstructure and Mechanical Property Evolution during Annealing of a Cold-Rolled Metastable Powder Metallurgy High Entropy Alloy

Severe warm-rolling mediated microstructure and texture of equiatomic CoCrFeMnNi high entropy alloy: A comparison with cold-rolling

Strength-ductility Synergy of Al0.3CoCrFeNiCu High-Entropy Alloy Via Cold Rolling and Subsequent Annealing

Improving Mechanical Properties of Fe-Mn-Co-Cr High-Entropy Alloy via Annealing after Cold Rolling