Abstract:Cu2O/CuO bilayers were fabricated by electrodeposition of the CuO layer in a copper(II)-ammonia complex aqueous solution, followed by photoelectrochemical deposition of the Cu2O layer at potentials ranging from -0.3 to -1.0 V referenced to a Ag/AgCl electrode in a copper(II)-lactate complex aqueous solution under light irradiation, and the effects of varied potentials of the photoelectrochemical Cu2O depositions and post-heating conditions on their structural, optical, and photovoltaic characteristics were investigated with X-ray diffraction, field emission-scanning electron microscopy, optical absorption measurements, and external quantum efficiency (EQE) measurements with and without applied bias voltage. The Cu2O layers with a characteristic 2.1 eV band gap energy were adhesively stacked on the thorn-like grains of the CuO layers possessing a characteristic 1.5 eV band gap energy, and dense and defect-free Cu2O/CuO bilayers could be fabricated at the potentials of -0.4 and -0.5 V, but the grain size of Cu2O decreased at -0.5 V. In addition, the metallic Cu was deposited simultaneously at potentials less than -0.7 V. The Cu2O/CuO bilayer fabricated at -0.4 V revealed photovoltaic features at wavelengths ranging from 350 nm to approximately 900 nm, and a maximum EQE value of 56.8% was achieved at 510 nm in wavelength with a bias voltage of -0.1 V. The maximum EQE value, however, decreased to 1.2% accompanied with the peak wavelength shift to 580 nm, and no photovoltaic feature was observed at potentials of -0.3, -0.7, and -1.0 V. The photovoltaic performance for the Cu2O/CuO bilayer fabricated at -0.4 V was ameliorated by heating at 423 K, and the maximum EQE values were enhanced to 87.7% at 550 nm and 89.8% at 530 nm in an ambient atmosphere and vacuum. Both the Cu2O and CuO layers acted as photovoltaic layers in the Cu2O/CuO bilayer fabricated at -0.4 V and heated at 423 K, and the electrical characteristic including the carrier mobility affected the photovoltaic performance. The photovoltaic feature, however, disappeared by heating above 523 K due to the formation of nanopores inside the CuO layer and near the CuO heterointerface to the Cu2O and fluorine-doped tin oxide substrate.

The Cu2O/CuO/SnO2 transparent pn junction film device towards photovoltaic enhancement with Cu2+ self-oxidation transition layer

CuBi2O4/CuO Heterojunction Coated with Electrodeposited ZnO Overlayer for Stable Solar Hydrogen Evolution

A transparent photovoltaic device of Cu2O/SnO2 QDs/SnO2 pn junction with difunctional homogeneous SnO2 QDs transition layer

Photovoltaic conversion enhancement of a transparent NiO/CdO/ZnO pn junction device with a CdO transition layer

The transparent pn junction of CuI/SnO 2 /ZnO core-shell orderly nanoarrays towards photovoltaic conversion enhancement

CuI/BaSnO 3 Quantum Dot/ZnSnO 3 Perovskite-based Transparent p–n Junction for Photovoltaic Enhancement

The Transparent Pn Junction of Cui/Sno2/Cu2o Core-Shell Orderly Nanoarrays Towards Photovoltaic Conversion Enhancement

Semitransparent Cu2O films based on CuO Back Layer for Photoelelctrochemical Water Splitting and Photovoltaic Applications

The photovoltaic conversion enhancement of CuAlO2/LaNiO3 quantum dots/SnO2 transparent pn junction via dual functional perovskite LaNiO3 QDs

Semitransparent Cu2O Films Based on CuO Back Layer for Photoelectrochemical Water Splitting and Photovoltaic Applications

Zn3In2S6 quantum dots modified transparent Cu2O films/TiO2 orderly nanoarrays pn junction towards photovoltaic conversion enhancement

Transparent pn junction of Mg:NiO/ZnO/SnO 2 via potential regulation and carrier injection of ZnO transition layer

Transparent p–n Junction in Cu 2 O/ZnS/ZnO Core–Shell Nanoarrays via In Situ Sulfuration for Enhanced Photovoltaic Stability

Preparation of Cu2o/Zno P-N Junction by Thermal Oxidation Method for Solar Cell Application

Thermal optimization of defected Cu2O photon-absorbing layer and the steady p-Cu2O/n-Si photovoltaic application

Introducing a Protective Interlayer of TiO2 in Cu2O–CuO Heterojunction Thin Film As a Highly Stable Visible Light Photocathode

The Transparent Mg:NiO/SnO2 Pn Junctions Toward Photovoltaic Conversion Enhancement Via the Potential Regulation of Mg-doping

A 5.5% efficient co-electrodeposited ZnO/CdS/Cu 2 ZnSnS 4 /Mo thin film solar cell

Photoelctrochemically Fabricated and Heated Cu2O/CuO Bilayers with Enhanced Photovoltaic Characteristics

The transparent photovoltaic NiO/TiO2 orderly nanoarray pn junction via synergism of AgInS2 quantum dots and Ti3+ self-doping

Sn/Sn3O4−x heterostructure rich in oxygen vacancies with enhanced visible light photocatalytic oxidation performance