Abstract:There has been considerable interest in low-temperature in-situ integration techniques for the fabrication of hetero-structured substrates and micro/nanosystems. This study presents a novel bonding approach that uses a water vapor-assisted surface activation strategy with neutral oxygen species (NOS). This method enables of highly efficient in-situ bonding process that utilizes the controllable and flexible environment to meet specific integration needs without exposure to the unstable ambient air. The NOS and water vapor increases hydroxyl groups, leading to smoother and more hydrophilic surfaces. The combined effects of NOS and the water vapor result in a larger bonded area ratio and significantly higher bonding energy compared to those activated by NOS alone. Meanwhile, the silicon oxide and quartz glass surfaces avoid being heavily electrically charged. This process thus achieved flawless silicon/quartz glass wafer bonding at 150 degrees C with a high bonding energy (similar to 4 J/m(2)) and Si/Si bonding pairs without any subsequent annealing voids. Then, the bonding pairs have been verified to have high reliability in extreme environments from -65 degrees C to 200 degrees C with no thermal-shocked cracks. The high-quality heterointerfaces could also withstand subsequent mechanical grinding and polishing for silicon-onquartz glass (SOQ) fabrication. Moreover, a SOQ structured microfluidic heat pipe device was successfully fabricated based on the low-temperature in-situ heterogenous bonding. The robust heterointerfaces ensured nonleakage working during the heat dissipation. This facile and cost-effective bonding method is suitable for damage-free heterogeneous integration of active devices, micro/nanofluidic chips, and M/NEMS packaging. It has of great potential in fields such as biochemical analysis, quantum computing, and thermal sensing.

Glass-Based Micro-Hotplate with Low Power Consumption and TGV Structure Through Anodic Bonding and Glass Thermal Reflow

Bonding of Glass-Based Microfluidic Chips at Low- or Room-Temperature in Routine Laboratory

Micro Fabrication of Micro Fluidic Glass Chip Without Clean Room Condition

From Surface Activation to Microfluidic Heat Pipes: an Innovative In-Situ Wafer Level Heterogenous Bonding Method

A Novel Approach to Fabricate Glass Micro-Objects for MEMS Application

Study on a Low-Cost and Fast Fabrication Method of Glass Microfluidic Chips

Recycled low-temperature direct bonding of Si/glass and glass/glass chips for detachable micro/nanofluidic devices

Glass Molding for Microstructures

Development of a Reliable Micro-Hotplate with Low Power Consumption

Low-Temperature Bonding And Interfacial Failure Behavior Of Si/Glass And Glass/Glass Chips

Design. Fabrication, and Test of an Embedded Si-Glass Microchannel Heat Sink for High-power RF Application

Study of the thermo-mechanical behavior of glass interposer for flip chip packaging applications

A simple approach to fabricate multi-layer glass microfluidic chips based on laser processing and thermocompression bonding

Fabrication of High‐Performance Silver Mesh for Transparent Glass Heaters Via Electric‐Field‐Driven Microscale 3D Printing and UV‐Assisted Microtransfer

Low-temperature Fusion Bonding of Aluminosilicate Glass Via Intermediate Water

Study on the Manufacture of Microfluidic Chip with Coated Glass

Micromachining of Pyrex 7740 Glass by Silicon Molding and Vacuum Anodic Bonding

Low-Cost Fabrication Strategies of Microfluidic Device on Glass Substrate

Fabricating Microstructures on Glass for Microfluidic Chips by Glass Molding Process

Anodic bonding of mid-infrared transparent germanate glasses for high pressure - high temperature microfluidic applications

A Preparation Technology of Micro-Structure Glass Based on Mixed Micro and Nano Powders