Abstract:There has been considerable interest in low-temperature in-situ integration techniques for the fabrication of hetero-structured substrates and micro/nanosystems. This study presents a novel bonding approach that uses a water vapor-assisted surface activation strategy with neutral oxygen species (NOS). This method enables of highly efficient in-situ bonding process that utilizes the controllable and flexible environment to meet specific integration needs without exposure to the unstable ambient air. The NOS and water vapor increases hydroxyl groups, leading to smoother and more hydrophilic surfaces. The combined effects of NOS and the water vapor result in a larger bonded area ratio and significantly higher bonding energy compared to those activated by NOS alone. Meanwhile, the silicon oxide and quartz glass surfaces avoid being heavily electrically charged. This process thus achieved flawless silicon/quartz glass wafer bonding at 150 degrees C with a high bonding energy (similar to 4 J/m(2)) and Si/Si bonding pairs without any subsequent annealing voids. Then, the bonding pairs have been verified to have high reliability in extreme environments from -65 degrees C to 200 degrees C with no thermal-shocked cracks. The high-quality heterointerfaces could also withstand subsequent mechanical grinding and polishing for silicon-onquartz glass (SOQ) fabrication. Moreover, a SOQ structured microfluidic heat pipe device was successfully fabricated based on the low-temperature in-situ heterogenous bonding. The robust heterointerfaces ensured nonleakage working during the heat dissipation. This facile and cost-effective bonding method is suitable for damage-free heterogeneous integration of active devices, micro/nanofluidic chips, and M/NEMS packaging. It has of great potential in fields such as biochemical analysis, quantum computing, and thermal sensing.

Recycled low-temperature direct bonding of Si/glass and glass/glass chips for detachable micro/nanofluidic devices

Bonding of Glass-Based Microfluidic Chips at Low- or Room-Temperature in Routine Laboratory

Low-Temperature Bonding And Interfacial Failure Behavior Of Si/Glass And Glass/Glass Chips

Low-temperature Direct Bonding of Glass Nanofluidic Chips Using a Two-Step Plasma Surface Activation Process

Micro Fabrication of Micro Fluidic Glass Chip Without Clean Room Condition

Low-temperature Fusion Bonding of Aluminosilicate Glass Via Intermediate Water

Bonding of Glass Microfluidic Chips at Room Temperatures

Low-temperature Direct Bonding of Strengthened Glass Chips for Optical Imaging and Co-Packaged Optics

A Simple Low-Temperature Glass Bonding Process with Surface Activation by Oxygen Plasma for Micro/Nanofluidic Devices

Direct Homo/Heterogeneous Bonding of Silicon and Glass Using Vacuum Ultraviolet Irradiation in Air

Room-temperature Bonding of Glass Chips Via PTFE-assisted Plasma Modification for Nanofluidic Applications

Direct Heterogeneous Bonding of SiC to Si, SiO2, and Glass for High-Performance Power Electronics and Bio-MEMS

From Surface Activation to Microfluidic Heat Pipes: an Innovative In-Situ Wafer Level Heterogenous Bonding Method

Bonding of Glass Nanofluidic Chips at Room Temperature by A One-Step Surface Activation Using an O2/Cf4 Plasma Treatment

Low-temperature direct bonding of silicon to quartz glass wafer via sequential wet chemical surface activation

Investigation and Improvement of Reversible Microfluidic Devices Based on Glass–pdms–glass Sandwich Configuration

Reversible bonding for microfluidic devices with UV release tape

Low-temperature Direct Bonding of Si and Quartz Glass Using the APTES Modification

Plasma Activated Titanium-Based Bonding for Robust and Reliable Si-Si and Si-glass Integration

Plasma-activated Silicon–glass High-Strength Multistep Bonding for Low-Temperature Vacuum Packaging

A room-temperature bonding of glass nanofluidic chips utilizing a surface activation with a fluorine-containing plasma treatment