Abstract:Sapphire is extensively utilized in the optical, aerospace, and civil electronic industries due to its favorable optical, physical, and chemical characteristics. To enhance the efficiency and quality of sapphire lapping, an orthogonal experiment was conducted on a single-side sapphire substrate using a ceramic lapping plate. The study examined the impact of lapping plate material, lapping pressure, lapping speed, and abrasive particle size on the surface roughness, profile, and removal rate. By analyzing the signal-to-noise ratio and variance of machining parameters, the influence rule and influence of the weight of machining parameters on machining results were obtained. The results of the experiment demonstrate that the material removal rate of sapphire was positively affected by an increase in lapping pressure, speed, and abrasive particle size. Moreover, the removal rate of the SiC lapping plate was the highest among the experimental materials. The roughness of the sapphire surface decreased with increasing lapping pressure, speed, and abrasive particle size, while the SiC plate had the lowest surface roughness. The profile tolerance of sapphire diminished as the lapping pressure, lapping speed, and the abrasive particle size increased. Additionally, the ZrO2 lapping plate exhibited the most minor profile tolerance. The size of the abrasive particle significantly impacted the material removal rate, with a specific gravity exceeding 70%. Similarly, the lapping pressure had a significant effect on both the surface roughness and the profile tolerance. The ideal machining parameter combination comprised an abrasive particle size of 10 μm, a lapping pressure of 22 785.0 Pa, a lapping speed of 60 rpm, and a lapping plate of SiC. Under optimal machining conditions, sapphire exhibited a material removal rate of 0.65 μm/h, a surface roughness of 0.0920 μm, and a profile tolerance of 2.0915 μm after 20 min of lapping. This demonstrated that the lapping process enables highly efficient and high-quality machining of sapphire substrates.

Influence of SiO 2 –ZnO mixed soft abrasive on tribological behavior and polishing performance of sapphire wafer

Polishing Performance and Removal Mechanism of Core-Shell Structured Diamond/SiO2 Abrasives on Sapphire Wafer

Tribochemical mechanisms of abrasives for SiC and sapphire substrates in nanoscale polishing

Study on Chemical Mechanical Polishing Performances of Sapphire Wafer (0001) Using Silica-Based Slurry

Study on the rheological properties and polishing properties of SiO 2 @CI composite particle for sapphire wafer

AFM and XPS Studies on Material Removal Mechanism of Sapphire Wafer During Chemical Mechanical Polishing (CMP)

Machining performance and material removal mechanism of sapphire with novel polishing slurry

A study on mechanism of sapphire polishing using the diamond abrasive by molecular dynamics

Chemical mechanical polishing of sapphire wafer using mixed silica nanoparticles

Fe-Nx/C Assisted Chemical–mechanical Polishing for Improving the Removal Rate of Sapphire

Optimization of polishing fluid composition for single crystal silicon carbide by ultrasonic assisted chemical-mechanical polishing

Novel model of material removal rate on ultrasonic-assisted chemical mechanical polishing for sapphire

Lapping of sapphire using developed clusters of diamond and ceria chemically active abrasives

An Experimental Investigation of Sapphire Grinding by Porous and Vitrified M0.5/1.5 Diamond Grinding Wheel

Preparation of the Nanodiamond@SiO2 Abrasive and its Effect on the Polishing Performance of Zirconia Ceramics

Study on the grinding characteristics of sapphire with the assistant of cerium oxide liquid

Orthogonal experimental study on the influence of machining parameters on flat lapping of sapphire substrate

Preparation of Non-spherical Colloidal Silica Nanoparticle and Its Application on Chemical Mechanical Polishing of Sapphire

Investigation on influence of polishing disc materials in UV-catalytic polishing of single crystal diamond

Surface modulation to enhance chemical mechanical polishing performance of sliced silicon carbide Si-face

Investigation of the chemical action mechanism based on reactive force field in SiC chemical–mechanical polishing process