Abstract:With the development of photoelectric wafers tend to be high brittleness, high hardness and high chemical stability, a single magnetorheological polishing is difficult to meet the application requirements of photoelectric wafers. The quality and efficiency of magnetorheological polishing (MRP) on photoelectric wafer can be further improved by electric field assisted polishing or photocatalysis assisted polishing. In this paper, TiO 2 –CI functional composite particles were synthesized by sol-gel method, and a variety of polishing fluid with magnetic, electric and optical multi field effects were prepared. Silicon wafer and fused silica glass were polished by fixed-point centering polishing method, and the mechanism of photocatalytic assisted magnetorheological polishing (PMRP) was studied by comparing the polishing performance of the polishing fluid under different applied fields. The results show that when the polishing fluids prepared by oil-based liquid, the material removal rate is high under the action of a single magnetic field, but the polishing quality is poor. After polishing for 60 min, the height difference in surface profile ΔRz of fused silica glass is 0.67 μm. When the 2.5 kV/mm electric field is applied, the abrasive distribution can be controlled by electromagnetic composite field, and the stiffness distribution of polishing pad is more uniform, but it will reduce the material removal rate (MRR). Compared with the single magnetic field, the height difference in surface profile ΔRz is reduced by 73.1 % to 0.18 μm under the magnetoelectric compound field, which can obtain a more flattened surface quality. When light field and magnetic field are applied, water-based polishing fluid is used for polishing. Because UV light can induce photocatalytic reaction, the strong oxidation group ·OH generated in the photocatalytic reaction can oxidize the materials of workpiece surface into the lower hardness materials. Therefore, the material removal rate is increased by 249 % to 13.4 mg/h compared with that without light field, and the surface roughness was reduced by 69.32 % to 1.05 nm.

Study on the rheological properties and polishing properties of SiO 2 @CI composite particle for sapphire wafer

Effect of Core-Diameters and Shell-Thicknesses of Fe3O4/SiO2 Composite Abrasives on the Performance of Ultrasound-Assisted Magnetorheological Polishing for Sapphire

Synthesis and Characterization of Nanocomposite Fe3O4/SiO2 Core–shell Abrasives for High-Efficiency Ultrasound-Assisted Magneto-Rheological Polishing of Sapphire

Rheological Properties and MR Polishing Characteristics of Core Shell-Structured Silica-Coated CI Particles

Optimization of polishing fluid composition for single crystal silicon carbide by ultrasonic assisted chemical-mechanical polishing

Ultrafine Polishing of Optical Polymer with Zirconia-Coated Carbonyl-Iron-particle-based Magnetic Compound Fluid Slurry

Influence of SiO 2 –ZnO mixed soft abrasive on tribological behavior and polishing performance of sapphire wafer

Photocatalysis-Assisted Chemical Mechanical Polishing of SiC Wafer Using a Novel SiO2@TiO2 Core-Shell Composite Nanoparticles Slurry

Study on heterogeneous Fenton reaction parameters for polishing single-crystal SiC using magnetorheological elastomers polishing pads

Preparation and performance study of silicon modified polyurethane-based magnetorheological elastomeric polishing pad

Investigation on the Relationship Between Apparent Viscosity of Fe3O4@SiO2 Abrasive-Based Magneto-Rheological Fluid and Material Removal Rate of Sapphire in Magneto-Rheological Polishing

Polishing Performance and Removal Mechanism of Core-Shell Structured Diamond/SiO2 Abrasives on Sapphire Wafer

Study on Process Optimization of Ultrasound Assisted Magneto-Rheological Polishing of Sapphire Hemisphere Surface Based on Fe3O4/SiO2 Core-Shell Abrasives

Preparation of Non-spherical Colloidal Silica Nanoparticle and Its Application on Chemical Mechanical Polishing of Sapphire

Study on Chemical Mechanical Polishing Performances of Sapphire Wafer (0001) Using Silica-Based Slurry

Preparation and polishing properties of water-based magnetorheological chemical finishing fluid with high catalytic activity for single-crystal SiC

Preparation of Ordered Mesoporous Si02/Mc N anocomposite Abrasives and Their Chemical Polishing Behavior on Fused Silicon Substrates

Polishing behavior of PS/SiO<sub>2</sub> Core-Shell nanoparticles with different shell thickness on fused silica Chemical Mechanical Polishing

Material Removal Rate of 4H-Sic Polishing with Polystyrene/CeO2Core/shell Abrasives

The processing properties of photocatalysis assisted magnetorheological polishing based on TiO 2 –CI composite particles

Synthesis of Sm-doped Colloidal SiO2 Composite Abrasives and Their Chemical Mechanical Polishing Performances on Sapphire Substrates