Abstract:CO2 capture in the spray tower using aqueous ammonia solution has been proved a potential approach for the post-combustion CO2 capture. To improve the performance of spray absorption, a new three-dimensional numerical model integrating the complex gas-liquid hydrodynamics and the chemistry of the NH3-CO2-H2O system has been proposed and developed in this paper. In the model, the gas-liquid hydrodynamics was simulated using the Euler-Lagrange method, while the chemistry of the NH3-CO2-H2O system, including both thermodynamic and kinetic characteristics, was modeled using user-defined modules implemented in the CFD package. Moreover, a laboratory scale spray absorption system was built, and run under various operating conditions were carried out in order to validate the model developed. Subsequently, the predicted results using different kinetic models were compared with the experimental results. It was found the model using Liu's kinetics showed a better agreement with the experiments, especially when the liquid temperature and NH3 concentration of solution vary. Furthermore, the validated model was used to study the fundamentals of spray absorption. It has been found that the gas temperature profile as well as gaseous CO2 and NH3 concentration profile depends on the velocity field, indicating the hydrodynamics should be considered when optimizing the design of reactor. It has also been found that the residence time of droplets increases with the increase of gas flow rate, leading to an increase in average droplets temperature and CO2 loading, while the increase of ammonia concentration of solution could significantly improve the overall CO2 mass transfer coefficient. When the solution temperature increases from 293 K to 303 K, the overall CO2 mass transfer coefficient gradually increases, resulting in CO2 removal efficiency improvement. However, when the solution temperature increases from 303 K to 313 K, the promotion of reverse reaction leads to the reduction of CO2 removal efficiency. In addition, the increase of ammonia solution flow rate would mainly increase the interphase area and promote both CO2 absorption and NH3 escape. The model developed in this paper can be used to optimize the design and operation of such reactors in practice.

Meso-scale CFD Modelling of CO2 Capture by Aqueous Ammonia Part I: Modeling

Numerical Simulation of Aqueous Ammonia-Based CO2 Absorption in a Sprayer Tower: an Integrated Model Combining Gas-Liquid Hydrodynamics and Chemistry

Performance Simulations of Mea/Nh3 Based Large-Scale Co2 Capture in Packed Columns under Different Flue Gas Parameters

Rate-Based Modelling and Validation of an Absorber and Stripper in an Amine-Based Post-Combustion CO2 Capture Process

Process simulations of NH3 abatement system for large-scale CO2 capture using aqueous ammonia solution

Optimization of Carbon Capture Process Using Aqueous Ammonia with Rate-Based Simulation Method

Modeling and Analysis of CO2 Capture by Aqueous Ammonia + Piperazine Blended Solution in a Spray Column

Modeling Analysis of Energy Requirement in Aqueous Ammonia Based CO2 Capture Process

A Comprehensive Model for Regeneration Process of CO 2 Capture Using Aqueous Ammonia Solution

CFD simulation of carbon dioxide in flue gas with monoethanolamine in structured packing

Modeling and Economic Analysis on Combined Capture of CO2 and SO2 in Flue Gas Using Aqueous Ammonia

Rate-Based Modeling of CO2 Absorption in Aqueous NH3 in a Packed Column

Experimental Studies And Rate-Based Process Simulations Of Co2 Absorption With Aqueous Ammonia Solutions

Experimental Study and Rate-Based Modeling on Combined CO2 and SO2 Absorption Using Aqueous NH3 in Packed Column

Comparison of Thermodynamic Models for Carbon Capture with Aqueous Ammonia

Simulation of CO2 capture using ammonia scrubbing: A comparison with MEA scrubbing

Numerical Studies for the Co2 Capture Process in A Fluidized-Bed Absorber

Process modeling of an advanced NH₃ abatement and recycling technology in the ammonia-based CO₂ capture process

Enhancement Technologies of Ammonia-Based Carbon Capture: A Review of Developments and Challenges

Intrinsic Insight of Energy-Efficiency Optimization for CO2 Capture by Amine-Based Solvent: Effect of Mass Transfer and Solvent Regeneration

CO2 Capture Using Piperazine-Promoted, Aqueous Ammonia Solution: Rate-based Modelling and Process Simulation