System Integration of an Optimally Designed Virtual Impactor with a QCM Sensor As a One-Stop PM2.5 Classification and Detection Platform

Yong Wang,Xuze Mei,Zhonggui Xu,Jingui Qian

DOI: https://doi.org/10.1021/acsomega.3c08402

IF: 4.1

2024-01-01

ACS Omega

Abstract:Excessive exposure to airborne particulate matter (PM), especially PM2.5 particles, adversely affects human health. Conventional PM2.5 detection instruments based on light scattering are generally bulky, expensive, and easily affected by particle size and composition. Here, we report a low-cost and compact one-stop PM2.5 detection platform by integrating a three-dimensional (3D) printed virtual impactor with a QCM sensor. To reduce eddy and airflow impact on the side wall and improve the VI lifetime, a computational fluid dynamics simulation is used to optimize the VI structure. Results show that when the included angle between the minor flow channel and the inner side of the major flow channel is 40-45 degrees and the included angle between the inlet channel and the outside wall of the major flow channel is 125 degrees, the VI has a relatively small particle loss, eddy, and good collection efficiency. Finally, the system detection performance is experimentally evaluated with a sensitivity of 0.08 Hz/min per mu g/m(3), showing a comparable performance with the commercial instrument.