Abstract:A high-precision wear particle monitoring instrument based on numerical simulation, machine vision, multitarget tracking algorithm, and microfluidic technology is designed and developed in this article. The instrument not only performs the traditional particle number and size detection but also proposes a particle density detection model based on motion velocity. First, an online visual microfluidic chip for oil particle motion was specially designed. Then, a mathematical model relationship between particle velocity and particle diameter, particle density, oil viscosity, and oil density was established by force analysis and solving the equation, which was used to explain the working principle of the instrument. Meanwhile, a multitarget tracking algorithm incorporating the characteristics of wear particles based on YOLOv5-Deepsort was custom-developed to detect the number, size, and motion characteristics of particles under the optical field of view of the image sensor. Second, the oil flow field distribution and the four factors affecting the particle motion characteristics in the self-developed chamber, particle size, particle material, particle radial position, and oil velocity, were analyzed by using the finite-element analysis in COMSOL. Finally, pin-on-disk wear experimental validation results demonstrated this approach has excellent suitability to monitor the number, size, and density of wear particles with diameters above and densities above 2000 kg/ simultaneously. This portable oil particle monitoring instrument provides technical support for condition monitoring, fault diagnosis, and intelligent maintenance of rotating mechanical equipment.

A system of continuous particles monitoring using virtual impactor

System Integration of an Optimally Designed Virtual Impactor with a QCM Sensor As a One-Stop PM2.5 Classification and Detection Platform

Design and Testing of an Impact Sensor Using Two Crossed Polyvinylidene Fluoride (PVDF) Films

A Miniature System for Separation and Detection of PM Based on 3-D Printed Virtual Impactor and QCM Sensor

A Miniature System for Classification and Concentration Detection of PM Based on 3D Printed Virtual Impactor and QCM Sensor

Airborne Particulate Matter Classification and Concentration Detection Based on 3D Printed Virtual Impactor and Quartz Crystal Microbalance Sensor

A miniature system for particulate matter (PM) measurement

A New Online Monitoring Method for Water-in-Oil Droplet Based Microfluidic Devices

An Aerosol Sensor for PM1 Concentration Detection Based on 3D Printed Virtual Impactor and SAW Sensor

High-Speed Micro-Particle Motion Monitoring Based on Continuous Single-Frame Multi-Exposure Technology

Design and fabrication of microfluidic channel using dry film photoresist for air sampling application

Airborne Mineral Dust Measurement Using an Integrated Microfluidic Device

Simulation on A Novel Micron-Array Inertial Impactor for Submicron and Ultrafine Particle Separation

Microfluidic Airborne Metal Particle Sensor Using Oil Microcirculation for Real-Time and Continuous Monitoring of Metal Particle Emission

Research on Wear Particle Online Monitoring Using Machine Vision for Rotating Machinery

[Development of a Two Stage Virtual Impactor for Stationary Source PM10 and PM2.5 Sampling].

Online Continuous Measurement of the Size Distribution of Pneumatically Conveyed Particles by Acoustic Emission Methods

Measurement and analysis of impact dynamic parameters of micron-sized single particles using particle shadow velocimetry

Radioactive aerosol separation characteristics study of a novel submicron virtual impactor.

A Micro Aerosol Sensor for the Measurement of Airborne Ultrafine Particles

Real-time detection of molecular structures and metal components within airborne particles using concurrent Raman and Spark emission spectroscopy