Abstract:<h3 class="u-h4 u-margin-m-top u-margin-xs-bottom">Background</h3><p>Accurate individual exposure assessment is crucial for evaluating the health effects of particulate matter (PM). Various portable monitors built upon low-cost optical sensors have emerged. However, the main challenge for their application is to guarantee accuracy of measurements.</p><h3 class="u-h4 u-margin-m-top u-margin-xs-bottom">Objective</h3><p>To assess the performance of a newly developed PM sensor, and to develop methods for post-hoc data calibration to optimize its data quality.</p><h3 class="u-h4 u-margin-m-top u-margin-xs-bottom">Method</h3><p>We conducted a series of laboratory experiments and field evaluations to quantify the reproducibility within Plantower PM sensors 7003 (PMS 7003) and the consistency between sensors and two established PM<sub>2.5</sub> measurement methods [tapered element oscillating microbalances (TEOM) and gravimetric method (GM)]. Post-hoc data calibration methods for sensors were based on a multiple linear regression model (MLRM) and a random forest model (RFM). Ratios of raw and calibrated readings over the data of reference methods were calculated to examine the improvement after calibration.</p><h3 class="u-h4 u-margin-m-top u-margin-xs-bottom">Results</h3><p>Strong correlations (≥0.82) and relatively small relative standard deviations (16–21%) between sensors were found during the laboratory and the field sampling. Compared with the reference methods, moderate to strong coefficients of determination (0.56–0.83) were observed; however, significant deviations were presented. After calibration, the ratios of PMS measurements over that of two reference methods both became convergent.</p><h3 class="u-h4 u-margin-m-top u-margin-xs-bottom">Conclusions</h3><p>Our study validated low-cost optical PM sensors under a wide range of PM<sub>2.5</sub> concentrations (8–167 μg/m<sup>3</sup>). Our findings indicated potential applicability of PM sensors in PM<sub>2.5</sub> exposure assessment, and confirmed a need of calibration. Linear calibration methods may be sufficient for ambient monitoring using TEOM as a reference, while nonlinear calibration methods may be more appropriate for indoor monitoring using GM as a reference.</p>

The Influence of Concentration and Size on the Error of Particulate Matter Detection Using Charge Induction Method

System Integration of an Optimally Designed Virtual Impactor with a QCM Sensor As a One-Stop PM2.5 Classification and Detection Platform

Measurement of circulation time of particles in fluidized bed based on electrostatic induction sensor

Research on a capacitive particle analysis smoke detector

A Capacitive Particle-Analyzing Smoke Detector for Very Early Fire Detection

Characterization of Tandem Aerosol Classifiers for Selecting Particles: Implication for Eliminating the Multiple Charging Effect

Optimal static light scattering detection angle for particulate matter size and concentration measurement

Detection of Particle Concentration and Particle Size Based on Aerodynamic Particle Size Spectrometer

Research on Particle Concentration Detection System Based on Laser Scattering Method

Dissecting PM sensor capabilities: A combined experimental and theoretical study on particle sizing and physicochemical properties

Identification methods of charged particles based on aero-engine exhaust gas electrostatic sensor array

On-line High-Accuracy Particulate Matter Monitoring Technology Using Multi-Channel Scattering Signals

A Simple Optical Aerosol Sensing Method of Sauter Mean Diameter for Particulate Matter Monitoring

Investigations Into The Sensing Mechanism Of Acoustic Emission Sensors For Particle Size Measurement In A Particular Case: Normal Incidence

A New Angular Light Scattering Measurement of Particulate Matter Mass Concentration for Homogeneous Spherical Particles

A Comparative Study of Induced and Transferred Charges for Mass Flow Rate Measurement of Pneumatically Conveyed Particles

Assessing the Value of Complex Refractive Index and Particle Density for Calibration of Low-Cost Particle Matter Sensor for Size-Resolved Particle Count and PM2.5 Measurements

On-field test and data calibration of a low-cost sensor for fine particles exposure assessment

An Ionization-Based Aerosol Sensor and Its Performance Study

Analytical modeling and optimization of electrostatic particle sensors for particle number detection: incorporating particle size influence

Design and evaluation of a calibration system for portable motor vehicle emission particle number detectors