Abstract:It is important to characterize the composition of aerosol particles in air, which causes adverse health effects and millions of deaths each year. Aerosol, or particulate matter (PM), is difficult to characterize because of its wide range of particle sizes; constituents (various organic and inorganic compounds); concentration; morphology; state (liquid or solid); and time-dependent modification. Infrared (IR) spectroscopy is a non-destructive method, which provides useful chemical information about the constituents. Current methods for collecting samples use filters that are made of materials which interferes with the IR spectra and thus lowers detection capabilities. Hence, collection on an IR-transparent substrate is desirable. In order to make a good quantitative measurement of the composition of the aerosol using IR-spectroscopy, a collector design should achieve some objectives. Low size-dependence, low chemical interference, and high collection efficiency are required to collect an aerosol sample that is identical to the aerosol in air. Furthermore, high spatial uniformity in deposition pattern is required to reduce optical artefacts or spectrometer dependence, and high collection mass flux is required to reduce the collection time needed for making a confident claim. Electrostatic precipitation (ESP) is a versatile method of aerosol collection and does not suffer from high pressure drop (which can modify the aerosol chemical composition, for example in filtration), or from bounce-off effects (which preferentially samples the size range and liquids, for example in impaction). ESP devices for particle deposition are present in either a translationally symmetric design (linear system) or a radially symmetric design (radial system). Most ESP designs in the public domain have been designed for different purposes and face limitations for fulfilling objectives stated above. Hence, a new device is necessary to meet performance objectives. Our design is based on an analytical, dimensionless (scalable) mathematical model that embodies the physics of particle migration trajectories due to fluid dynamics and electrostatics that lead to particle capture in a two-stage ESP device. This model allowed us to evaluate the tradeoffs among objectives to arrive at a design optimized across multiple objectives, and across multiple length scales (due to its dimensionless form). We validated this model against numerical simulations using COMSOL Multiphysics software, which is considered to be accurate but can only be run for a limited number of configurations (with respect to geometry and operating parameters) due to its high computational cost. Using the validated analytical model, we investigate the relationship among device geometry, methods of particle introduction, operational parameters, and deposited particle positions (which determines collection efficiency, uniformity, and size dependence), to arrive at a range of designs that meet design criteria. We further report the fabrication of a suitable embodiment using 3D-printing while incorporating ease of operation and handling. Measurement capabilities and limits of the device using different laboratory-generated aerosol are reported.

Design and performance of a novel miniaturized electrostatic sampler for efficient airborne particulate matter sampling

System Integration of an Optimally Designed Virtual Impactor with a QCM Sensor As a One-Stop PM2.5 Classification and Detection Platform

Development of a Novel Electrostatic-Based Bioaerosol Sampler

Introduction and Simulation of a Small Electro Cyclone for Collecting Indoor Pollen Particles

Electric charge effect of micro-droplets generated by electrospray atomization on removal of indoor fine particulate matter

A miniature system for particulate matter (PM) measurement

Development of an Integrated Microfluidic Electrostatic Sampler for Bioaerosol

Development and Experimental Investigation of the Narrow-Gap Coated Electrostatic Precipitator with a Shield Pre-Charger for Indoor Air Cleaning

Electrostatic precipitation (ESP) index driven bio-aerosol collection for a high biological viability sampling

Highly Effective Removal of PM2.5 from Combustion Products: an Application of Integrated Two-Stage Electrostatic Precipitator

Development of an Automated Electrostatic Sampler (aes) for Bioaerosol Detection

Current Density and Efficiency of a Novel Lab ESP for Fine Particles Collection

A Miniature System for Separation and Detection of PM Based on 3-D Printed Virtual Impactor and QCM Sensor

Development of a new Portable Ultrafine Particle Sizer for Indoor Aerosol Monitoring

Microfluidic Air Sampler for Highly Efficient Bacterial Aerosol Collection and Identification

Design and Evaluation of a Mini-Faraday Cup for Portable Ultrafine Particle Sizer

Performance of an Electrostatic Precipitator with Superhydrophobic Surface when Collecting Airborne Bacteria

A Sampler for Collecting Fine Particles into Liquid Suspensions

A Miniature System for Classification and Concentration Detection of PM Based on 3D Printed Virtual Impactor and QCM Sensor

Design and evaluation of a portable PM2.5 monitor featuring a low-cost sensor in line with an active filter sampler

Method and apparatus for quantitative measurement of aerosol composition using controlled collection of airborne particles