Abstract:As the synthesis unit of a gas cyclone and electrostatic precipitator, electrocyclone has advantages in particle collection efficiency, capital outlay, and space occupation. This paper proposes a better combination of the gas cyclone and electric field based on the self-designed vortex-broken wing. The performances of the vortex-broken electrocyclone with different inlet velocities and working voltages were investigated by both experiments and numerical simulations. The flow field and electric field in the electrocyclone were obtained by large eddy simulation and solving the potential equation, respectively. The particles were modeled by the Lagrangian particle tracking model and the dynamic behavior of a representative particle was analyzed. The experimental results show that the vortex-broken electrocyclone can reduce the pressure drop and improve the collection efficiency simultaneously. However, the reduction in pressure drop is obvious at high inlet velocity, while the increment in collection efficiency is just the opposite. On the one hand, the simulated flow field reveals that the mechanism for the reduction in pressure drop is that the vortex-broken wing breaks up the inner vortex core, thereby yielding a static pressure recovery. On the other hand, the electric intensity and velocity have opposite directions in the key flow regions, thus affecting the force balance and changing particle trajectories. Further analysis of particle dynamics demonstrates that although the electric field force is far less than the drag force, the particle trajectory can be significantly changed over time. These findings can provide guidance for optimizing the technologies that incorporate electric fields and gas cyclones.

Introduction and Simulation of a Small Electro Cyclone for Collecting Indoor Pollen Particles

Performance Evaluation of a New Micro Gas Cyclone Using Simulation and Experimental Studies to Capture Indoor Fine Particles

Micro Gas Cyclone Design and Performance Evaluation to Collect Dust Particles

Performance Comparison Between Micro and Electro Micro Cyclone

Performance and techno-economic evaluation of a high-efficiency electrospray cyclone

Simulation Study of a Novel Cylindrical Micro-Electrostatic Particulate Air Filter with High Filtration Efficiency and Low Resistance

Electric charge effect of micro-droplets generated by electrospray atomization on removal of indoor fine particulate matter

Design and validation of a sampling module for a cyclonic wet-wall bioaerosol sampler using a computational fluid dynamics model

Enhancing the Collection Efficiency of a Gas Cyclone with Atomization and Electrostatic Charging

Effect of Particle Hydrophilicity on the Separation Performance of a Novel Cyclone

The Effects of Electrospray-Based Electrostatic Precipitator for Removing Particles

Experimental Study of a Compact Electrostatically Assisted Air Coarse Filter for Efficient Particle Removal: Synergistic Particle Charging and Filter Polarizing

Dust Collection's Efficiency of Low Reynolds Purifier via Computational Fluid Dynamic Simulation and Optimization

Numerical Simulating for the Cyclone Separator Equipping with Acoustic Agglomeration of Inhalable Particulates

Performance experiments and pressure drop prediction modelling of an energy-saving cyclone separator

Particle Deposition in A Full Scale Hybrid Electrostatic-Filtration Collector

The model for the separation efficiency of the electrostatic cyclone dust collector

Enhancing fine particle separation by hybrid-electrostatic-turbulence coagulation: An experimental and numerical investigation

Numerical Evaluation of Respiratory Droplet Removal by an Ionic Wind-Driven Electrostatic Device in an Indoor Environment

Simulation Research on Particle Collection Efficiency of Electrostatic Precipitators

Experimental and Numerical Study on the Performance and Mechanism of a Vortex-Broken Electrocyclone