Abstract:In order to understand the effect of precipitation on the slip activities of Mg-Gd-Y-Zn-Zr alloys, the dislocation slip activities of solid-solution and as-aged alloys during ambient temperature quasi-in-situ compression were quantitatively investigated by electron backscattered diffraction (EBSD)-assisted slip trace analysis. First, slip trace analysis of both alloys showed that the β' precipitates reduced the frequency and number of grains with slip traces significantly, resulting in a pronounced precipitate-hardening behavior. At 11% strain, the aging treatment reduced the proportion of prismatic slip and second-order pyramidal slip by 4.6% and 9.3%, respectively, while the proportion of basal slip increased by 13.9%, indicating that the precipitate-hardening effect of non-basal slip was stronger than that of basal slip. Moreover, based on the slip trace statistical analysis and TEM images of the sheared β' precipitates, the critical resolved shear stress (CRSS) increments of different slip modes caused by the prismatic plate-shaped β' precipitates follow the order of Δτpyramidal-2 > Δτprismatic > Δτbasal. Also, we found the plastic inhomogeneity of solid-solution alloy during ambient temperature deformation can increase the propensity of non-basal dislocation slip and promote non-Schmid behaviors. However, a large number of fine β' precipitates dispersed in the as-aged alloy can effectively alleviate the plastic inhomogeneity in the grain-scale range during ambient temperature deformation. Further, TEM dislocation analysis under two-beam conditions shows that the abundant solute RE atoms in the solid-solution Mg-Gd-Y-Zn-Zr alloy contribute to the activity of second-order pyramidal dislocations. Therefore, we conclude that the changes in slip activity caused by the precipitation of Mg-Gd-Y-Zn-Zr alloys are mainly attributed to β' precipitates, plastic inhomogeneity, and solute RE atoms.

Precipitation Reactions in a Mg-Gd-Y-Sm-Zr Alloy at 225℃

Effects of solid solution and aging process on microstructure and mechanical properties of Mg-Gd-Y alloy

Precipitation Behavior of Mg-7Gd-3Y-2Zn-0.5Zr Alloy during Isothermal Aging

Precipitate Evolution in Mg−7Gd−3Y−1Nd−1Zn−0.5Zr Alloy During Isothermal Ageing at 240 °C

Atomic-scale study on the precipitation behavior of an Al-Zn-Mg-Cu alloy during isochronal aging

Unveiling precipitation behavior in Mg-Y based alloys

Investigations on Microstructure and Mechanical Properties of Cast Mg-Gd-Y-Zn-Zr-Nd Alloy

Microstructure and Mechanical Properties of Mg-Xy-1.5mm-0.4zr Alloys

Evolution of precipitates in Mg?7Gd?3Y?1Nd?1Zn?0.5Zr alloy with fine plate -like 14H-LPSO structures aged at 240?C

Precipitate evolution of as-cast Mg-9Gd-2Y-0.5Zn-0.5Zr alloy containing LPSO, β′′, β′ and γ'' phases during isothermal aging at 200 °C

Comparative study on dislocation slip activity of the solid-solution and as-aged Mg-9.8Gd-3.5Y-2.0Zn-0.4Zr (wt%) alloys during ambient temperature quasi-in-situ compression

Characterisation of Precipitates in a Mg–7Gd–5Y–1Nd–0.5Zr Alloy Aged to Peak-Ageing Plateau

Structural Changes of Precipitates by Aging of an Mg-4 at%Dy Solid Solution Studied by Atomic-Scaled Transmission Electron Microscopy

Tuning texture and precipitation using Y/Gd atomic ratio in iso-concentration Mg–Y–Gd–Ag–Zr extruded alloys

Precipitation behavior in the early stage of aging in an Al–Li°Cu–Mg–Zr–Ag (Weldalite 049) alloy

HRTEM Observation of Precipitates in Mg-Gd-Zr and Mg-Y-Zr Alloys Aged at 423 K

Effects of extrusion process on microstructure, precipitates and mechanical properties of Mg-Gd-Y-Zr-Ag alloys

Dynamic Recrystallization Mechanism and Precipitation Behavior of Mg-6Gd-3Y-3Sm-0.5Zr Alloy During Hot Compression

Characterization of β precipitate phase in Mg-7Gd-5Y-1Nd-0.5Zr alloy

Determination of the Parameters of Precipitates in Aged Mg – 8% Zn – 4% Al – 0.2% Cr – 0.5% Bi Alloy

Static recrystallization and precipitation behavior of forged and annealed Mg–8.7Gd–4.18Y–0.42Zr magnesium alloy