Abstract:Additively manufactured alloys undergo a rapid solidification process followed by thermal cycles, which promotes the microstructures to return to equilibrium. The microstructural behavior therein is especially complicated and inconceivable at times, thereby greatly restricting the tailorability of microstructures for additive manufacturing. To improve the understanding of microstructure formation in rapidly solidified TiAl alloy, Ti-47Al-2Cr-2Nb powders were aging-treated to reveal the microstructural evolution behavior on multiple scales, and the microstructural transformation mechanisms were comprehensively analyzed from the viewpoints of thermodynamics and kinetics. The results show that the rapidly solidified TiAl alloy almost retains the alpha 2 phase, which then transforms into nanolamellar structures or equiaxed gamma microstructures depending on the temperature. The completely different microstructure selections were determined by the competitive growth of lamellar structures and equiaxed gamma grains. More importantly, atypical pathways for lamellar and twinning transformations were first discovered in these microstructural transformation processes. A 6H-type long periodic stacking ordered (LPSO) phase was observed to be in the form of straight laths in the retained alpha 2 phase, and 9R-and 18R-type LPSO phases were discovered in the equiaxed gamma grains. The 6H-type LPSO phase transformed into nano gamma laths, whose formation driving force was deduced to result from the extremely high elastic energy stored in the retained alpha 2 phase. The 9R-and 18R-type LPSO phases transformed into a more stable gamma twin phase to reduce the entire energy of the system. This research may potentially enhance the understanding of the microstructure of additively manufactured TiAl alloy and consequently, the tunability of such microstructure as required. (c) 2022 Acta Materialia Inc. Published by Elsevier Ltd. All rights reserved.

Rapidly Solidified Microstructure of Ti60 Alloy Produced by Laser Rapid Forming Process

Investigation on the Microstructure and Mechanical Behaviors of a Laser Formed Nb-Ti-Al Alloy

Microstructure and Mechanical Properties of Ti-6al-4v Components Fabricated by Laser Micro Cladding Deposition

Microstructure and Mechanical Properties of Ti60-Ti2alnb Functionally Graded Materials Fabricated by Laser Directed Energy Deposition

In-Situ Tensile Deformation Behavior Of As-Built Laser Direct Metal Deposited Ti-6al-4v Alloy At 200 Degrees C

Microstructure of a Ti–50 Wt% Ta Alloy Produced Via Laser Powder Bed Fusion

Chemical, microstructure, and mechanical property of TiAl alloys produced by high-power direct laser deposition

Microstructure and mechanical properties of laser-deposited Ti65 near-alpha titanium alloy

Study of microstructure and compressive strength of a novel Ti-0.75Al-9.5V alloys manufactured by laser deposition melting

Microstructure Formation and Tailoring of the Intermetallic TiAl Alloy Produced by Direct Laser Deposition

Hot Tensile Deformation Behavior of Ti-6Al-4V Titanium Alloy Made by Laser Melting Deposition

High-Velocity Banding Structure in the Laser-Resolidified Hypoperitectic Ti47al53 Alloy

Microstructure Evolution and Globularization Mechanism of Lamellar Phases in Ti6.5Al2Zr1Mo1V Produced by Electron Beam Melting

Optimization of Processing Parameters and Microstructure Evolution of (TiB+La 2 O 3 )/Ti6Al4V Manufactured by Laser Melting Deposition

Microstructural Evolution of Rapidly Solidified Ti–Al Peritectic Alloy

Microstructure characteristics of a γ single-phase Ti-55Al-7.5Nb alloy fabricated via additive manufacturing

Atypical Pathways for Lamellar and Twinning Transformations in Rapidly Solidified TiAl Alloy

Alternative-band microstructure and LPSO phase in TiAl alloy produced by direct laser deposition

Grain Morphology Control and Texture Characterization of Laser Solid Formed Ti6al2sn2zr3mo1.5cr2nb Titanium Alloy

Understanding the solute segregation and redistribution behavior in rapidly solidified binary Ti- X alloys fabricated through non-equilibrium laser processing

Directional Growth of Metastable Phase Γ in Laser-Remelted Ti–Al