Abstract:A mixed lubrication model,based on an unified Reynolds equation in all lubrication regimes including elastohydrodynamic,mixed and boundary lubrication,for prediction of the sliding friction between rough surfaces in point contacts,was developed.In the calculation,the fluid traction in the lubrication region was determined in terms of rheology model for the lubricant,while the friction from asperity contact was calculated by limiting shear stress model of boundary film.Thus the total friction was obtained by summing up the two components.Then,the effects of roughness amplitude and texture on friction coefficient were investigated.The magnitude of fluid friction coefficient from the different non-Newtonian fluid models with limiting shear stress was also compared.The results show that a rougher surface would give rise to higher friction coefficient in mixed lubrication regime,and higher critical speed of transition from full-film elastohydrodynamic to mixed lubrication.But roughness amplitude has less effect in hydrodynamic and boundary lubrication.Cross texture is more beneficial to lubrication than the transverse if the operating conditions are the same.Different rheology models with limiting shear strength have little effect on prediction of fluid traction under the same operating conditions.

Theoretical Study on the Lubrication Failure for the Lubricants with a Limiting Shear Stress

An Analysis of Elastohydrodynamic Lubrication with Limiting Shear Stress: Part I—Theory and Solutions

Numerical Analysis of Lubrication Property for Port Plate Pair of Axial Piston Pump

A Study on the Limit Criterion of Full and Partial Lubrication

EHL Performance of the Lubricant with Shear Strength: Part I — Boundary Slippage and Film Failure

EHL Film Thickness Limitation Theory Under a Limiting Shear Stress

Influence of wall slip of lubricants on performance of elastohydrodynamic lubrication in line contact

Study on Thin Film Lubrication With Second-Order Fluid

The Non‐newtonian Effect of Temperature on Hydrodynamic Lubrication Failure

Fully Flooded, Starved and Parched Lubrication at a Point Contact System

Study on Lubrication Theory-progress and Thinking-over

A computer model for sliding friction in lubricated-point contacts

A Lubrication Deviation From the Classical EHL Theory by the Lubricant Viscoplasticity: Part I - Film Thickness Dependence

About the Load-Carrying Capacity of Elastohydrodynamic Lubrication Film

Experimental Study of the Interfacial Slip on Hydrodynamic Lubrication Under Different Wettabilities

Multiscale simulation on shearing transitions of thin-film lubrication with multi-layer molecules

Molecular origin of limiting shear stress of elastohydrodynamic lubrication oil film studied by molecular dynamics

Study of Transition from Full-film to Boundary Lubrication

Prediction of Sliding Friction Force of Rough Surfaces in Lubricated Point Contacts

Application of Navier-Stokes equation to lubrication

The Failure of Fluid Film at Nano-Scale