Abstract:The behaviour of grease lubricating film in and the micro-scale migration of lubricant around a point contact under starved condition was studied by using relative optical interference intensity method.Under laboratory conditions,the contact would experience fully flooded phase-starving phase-deposited film lubrication phase-bled oil lubrication phase,successively.By using atomic force microscope (AFM),the deposited film was detected.It was formed from the sheared thickener debris during the rolling process and was of nano-scale.Infrared measurement showed that bled oil was basically base oil which was gradually squeezed out of the bulk grease during the operation.In the very beginning of the experiment,the initial grease reservoir around the contact was lost due to starvation,however,bled oil would reform a second phase oil reservoir to replenish the contact in the long run.Thickener deposited film would increase the contact angle of bled oil on the rolling surface which prevented bled oil from replenishing the rolling track.But this deposited film would be consumed during overrolling,after which the bled oil would reflow back to the contact.Evidence showed that the nano-scale thickener deposited film contributed to protecting rolling surface when bled oil was insufficient.

Fully Flooded, Starved and Parched Lubrication at a Point Contact System

Experimental Analysis On Oil Film Properties Of Plane Port Pair In Axial Piston Machine

Numerical Analysis of Lubrication Property for Port Plate Pair of Axial Piston Pump

Experimental Investigation of Lubrication Film Starvation of Polyalphaolefin Oil at High Speeds

Effect of Oil Starvation on the Surface Dimple in Elastohydrodynamic Lubrication Contact under Opposite Sliding Conditions

An Experimental-Study on Oil-Supply in A Space Bearing with an Oil-Impregnated Retainer

Influence of Lubrication Starvation and Surface Waviness on the Oil Film Stiffness of Elastohydrodynamic Lubrication Line Contact

A Mixed Lubrication Model with Consideration of Starvation and Interasperity Cavitations

Starvation and Reflow of Point Contact Lubricated with Greases of Different Chemical Formulation

Film Thickness Decay and Replenishment in Point Contact Lubricated with Different Greases: A Study into Oil Bleeding and the Evolution of Lubricant Reservoir

Predicting Fatigue Life for Finite Line Contact under Starved Elastohydrodynamic Lubrication Condition

A Study on the Limit Criterion of Full and Partial Lubrication

Numerical simulations of lubricated contact - Effects of variation of entraining velocity

Study on Starved Lubrication Performance of a Cycloid Drive

An Original Methodology to Model Stationary and Transient Starvation in Elastohydrodynamic Lubrication Contact

Mechanism of Nano-Scale Thickener Deposited Film in Starved Grease Lubrication

The Effect of Oil Droplet on the Lubrication Performance

Simulation Sudden Oil Supply in Starved High-Speed Angular Contact Ball Bearing

A Universal Model for Both Flooded and Starved Lubrication Regimes and Its Application in Ring–Liner System

Direct Observation of the Impact of Water Droplets on Oil Replenishment in EHD Lubricated Contacts

Theoretical Study on the Lubrication Failure for the Lubricants with a Limiting Shear Stress