Abstract:Most machine elements, such as gears and bearings, are operated in the mixed lubrication region. To evaluate lubrication performance for these tribological components, a contact model in mixed elastohydrodynamic lubrication is presented. This model deals with the EHL problem in the very thin film region where the film is not thick enough to separate the asperity contact of rough surface. The macro contact area is then divided into the lubricated area and the micro asperity contact areas by the contacted rough surfaces. In the case when asperity to asperity contact is present, Reynolds equation is only valid in the lubricated areas. Asperity contact pressure is determined by the interaction of two mating surfaces. The applied load is carried out by the lubricant film and the contacted asperities. FFT techniques are utilized to calculate the surface displacement (forward problem) by convolution and the asperity contact pressure (inverse problem) by deconvolution for non-periodic surfaces. With the successful implementation of FFT and multigrid methods, the lubricated contact problem can be solved within hours on a PC for the grids as large as one million nodes. This capability enables us to simulate random rough surfaces in a dense mesh. The load ratio, contact area ratio and average gap are introduced to characterize the performance of mixed lubrication with asperity contacts. Discussions are given regarding the asperity orientation as well as the effect of rolling-sliding condition. Numerical results of real rough topography are illustrated with effects of velocity parameter on load ratio, contact ratio, and average gap.

A Mixed Lubrication Model with Consideration of Starvation and Interasperity Cavitations

A Computer Thermal Model of Mixed Lubrication in Point Contacts

Computer model of mixed lubrication in point contacts

Deterministic Solutions and Thermal Analysis for Mixed Lubrication in Point Contacts

A Mixed Elastohydrodynamic Lubrication Model With Asperity Contact

A Full Numerical Solution to the Mixed Lubrication in Point Contacts

A New Deterministic Model for Mixed Lubricated Point Contact with High Accuracy

A complete deterministic model of point contact mixed lubrication coupling dual-mode effects of surface fractal characteristics

Evaluating the contact model for anisotropic non-Gaussian roughness in mixed lubrication regime

A computer model for sliding friction in lubricated-point contacts

Mixed Lubrication Analyses by a Macro-Micro Approach and a Full-Scale Mixed EHL Model

Modelling for Water-Based Liquid Lubrication with Ultra-Low Friction Coefficient in Rough Surface Point Contact

A Mortar Finite Element Formulation for Large Deformation Lubricated Contact Problems with Smooth Transition Between Mixed, Elasto-Hydrodynamic and Full Hydrodynamic Lubrication

Prediction of Sliding Friction Force of Rough Surfaces in Lubricated Point Contacts

Numerical simulation of mixed lubrication considering surface forces

Numerical Prediction of Surface Wear and Roughness Parameters During Running-In for Line Contacts under Mixed Lubrication

An Original Methodology to Model Stationary and Transient Starvation in Elastohydrodynamic Lubrication Contact

Fully Flooded, Starved and Parched Lubrication at a Point Contact System

A fully coupled finite element solution for the mixed elastohydrodynamic lubrication of finite line contacts

A Strongly Coupled Finite Difference Method–Finite Element Method Model for Two-Dimensional Elastohydrodynamically Lubricated Contact

Mixed Turbulent Lubrication Analysis of Worn Journal Bearing with End Oil Supply