Abstract:Computational methods were used to analyse the elasto-hydrodynamic lubrication of a complex rotor–bearing system. The methodology employed computational fluid dynamics (CFD), based on the Navier–Stokes equation and a fluid–structure interaction (FSI) technique. A series of models representing the system were built using the CFD–FSI methodology to investigate the interaction between the lubrication of the fluid film, and elastic dynamics of the rotor and journal bearing. All models followed an assumption of isothermal behaviour. The FSI methodology was implemented by setting nodal forces and displacements to equilibrium at the fluid–structure interface, therefore allowing the lubrication of the fluid and the elastic deformation of structures to be solved simultaneously. This is significantly different to the more common techniques—such as the Reynolds equation method—that use an iterative solution to balance the imposed load and the force resulting from the pressure of the fluid film to within a set tolerance. Predictions using the CFD–FSI method were compared with the results of an experimental study and the predictions from an ‘in-house’ lubrication code based on the Reynolds equation. The dynamic response of the system was investigated with both rigid and flexible bodies for a range of different bearing materials and dynamic unbalanced loads. Cavitation within the fluid film was represented in the CFD–FSI method using a simplified phase change boundary condition. This allowed the transition between the liquid and vapour phases to be derived from the lubricant’s properties as a function of pressure. The combination of CFD and FSI was shown to be a useful tool for the investigation of the hydrodynamic and elasto-hydrodynamic lubrications of a rotor–bearing system. The elastic deformation of the bearing and dynamic unbalanced loading of the rotor had significant effects on the position of its locus.

Application of Navier-Stokes equation to lubrication

Approximate Solution of Navier-Stokes Equations for Viscous Flow of Floating-Ring Bearings

Lubrication and stability analysis of nonlinear rotor-bearing system

Numerical Analysis on Gas Lubrication of Microsliders with a Modified Navier-Stokes Equation

Comparison of Lubrication Approximation and Navier-Stokes Solutions for Dam-Break Flows in Thin Films

A Novel Reynolds Equation of Non-Newtonian Fluid for Lubrication Simulation

Numerical Simulation on Velocity Profiles of Mill Bearing Lubrication

Study on Thin Film Lubrication With Second-Order Fluid

Iteration Framework for Solving Mixed Lubrication Computation Problems

Numerical Analysis on the Effect of Transverse Surface Roughness in Non-Newtonian Fluid Lubrication

A Full Numerical Solution to the Mixed Lubrication in Point Contacts

Numerical Solution of Reynolds' Equation for Ultra-Thin Gas Film Lubrication at the Head/disk Interface

Application of Computational Fluid Dynamics and Fluid–Structure Interaction Method to the Lubrication Study of a Rotor–Bearing System

Experiments on Laminar Flow Between Parallel Plates with a Heterogeneous Slip/No-Slip Surface

Analytical Solution of Reynolds Equation under Dynamic Conditions

Influence of local turbulent flow on the performance of a mixed-lubrication bearing

The Effects of Shear Stress on the Lubrication Performances of Oil Film of Large-Scale Mill Bearing

Comparison of Navier-Stokes simulations with long-wave theory: Study of wetting and dewetting

Simulation of Lubricant Rheology in Thin Film Lubrication Part I: Simulation of Poiseuille Flow

Numerical simulations of lubricated contact - Effects of variation of entraining velocity

On the Performance of Dynamically Loaded Journal Bearings Lubricated with Couple Stress Fluids