Abstract:In this paper, a theoretical model for the film thickness prediction of elastohydrodynamic lubrication of elliptical contacts with spinning and rolling/sliding motions is presented, in which 1) an effective ellipticity ratio ke is introduced to present the ellipse feature instead of the normal ellipticity ratio k in case of that the entraining velocity at the center of contact ellipse is at an angle with minor axis, 2) Roelands and Dowson-Higginson’s equations are adopted to express the influence of pressure upon lubricant viscosity and density, 3) multilevel/multigrid techniques, with low complexity and good stability, are used for the purpose of reducing computing time in the complex numerical analysis. With this model the characteristics of film shape and pressure distribution of elastohydrodynamic lubrication of elliptical concentrated contacts with spinning and rolling/sliding were discussed. The results showed that the spinning motion has significant influence on the film shape and pressure distribution. Based on a large number of numerical results of elastohydrodynamic lubrication analysis of elliptical concentrated contacts with spinning and rolling/sliding, new expressions for the minimum and central film thickness prediction were regressed. Their accuracy was analyzed by comparisons with numerical results of an evaluation set and others’ expressions under pure rolling and/or sliding condition. The comparisons showed that the two new expressions have satisfactory accuracy and potential application to engineering analysis and design.

Influence of wall slip of lubricants on performance of elastohydrodynamic lubrication in line contact

EHL Performance of the Lubricant with Shear Strength: Part I — Boundary Slippage and Film Failure

Effects of wall slip on the dynamic characteristics of water-lubricated bearing considering rough contact

About the Load-Carrying Capacity of Elastohydrodynamic Lubrication Film

Effects of boundary slips on thermal elastohydrodynamic lubrication under pure rolling and opposite sliding contacts

An Analysis of Elastohydrodynamic Lubrication with Limiting Shear Stress: Part I—Theory and Solutions

A computer model for sliding friction in lubricated-point contacts

Prediction of Sliding Friction Force of Rough Surfaces in Lubricated Point Contacts

Theoretical Study on the Lubrication Failure for the Lubricants with a Limiting Shear Stress

Effect of roughness on lubrication of low elastic modulus in line contact

Simulation of Sliding Wear in Mixed Lubrication

Thermal mixed elastohydrodynamic lubrication modeling and analysis of the lubricated non-conformal contacts with non-Gaussian surface roughness and coating

Experimental Study of the Interfacial Slip on Hydrodynamic Lubrication Under Different Wettabilities

Testing study on wall-slip deduction of lubricating grease rheological property

Elastohydrodynamic Film Thickness in Elliptical Contacts with Spinning and Rolling

Effects of Texture Orientation on the Mixed Thermal Elastohydrodynamic Lubrication and Fatigue Life in Point Contacts

A Lubrication Deviation From the Classical EHL Theory by the Lubricant Viscoplasticity: Part I - Film Thickness Dependence

Frictional Behaviour of Engineering Surfaces in Overall Lubrication Regimes of Point Contacts

Molecular Dynamics Study of Interfacial Slip Behavior of Ultrathin Lubricating Films

Elastohydrodynamic Lubrication Analysis on Line Contact Lubricated with Grease

Experimental Investigation on Effects of Surface Texturing on Lubrication of Initial Line Contacts