Abstract:The understanding of fluid slip over a hydrophobic surface is of great importance for reducing the drag for fluid flows. Dissipative particle dynamics (DPD) is used to investigate the mechanism of fluid slip at the solid-fluid interface in microchannels. A wall model adopting three layers of frozen particles is proposed for DPD simulation. In addition, a modified bounce-forward reflection is proposed to reintroduce fluid particles back into the fluid region when they " penetrate” into the wall region in the calculation due to the soft potential employed. Then the Couette flow is simulated by using the proposed wall model. The simulation results show that the no-slip or slip of the fluid at the wall can be achieved by adjusting parameter \begin{document}$ {a_{\rm wf}}$\end{document}. The parameter \begin{document}$ {a_{wf}}$\end{document} represents the interaction between wall particles and liquid particles. Our simulation results show that the distributions of the velocity, density, temperature and shear stress compare well with the corresponding analytical solutions with \begin{document}$ {a_{\rm wf}} = 9.68$\end{document}, and there is no fluctuation of the fluid density near the wall. This indicates that the no-slip is obtained, and hence the wall is hydrophilic. With \begin{document}${a_{\rm wf}} > 9.68$\end{document}, the wall becomes hydrophobic and the fluid can slip at the wall. The wall becomes more hydrophobic with larger \begin{document}${a_{\rm wf}} $\end{document}, and the stronger hydrophobicity leads to greater slip. The slip velocity and slip length can be used to describe the fluid slip. According to the Navier slip boundary model, the slip velocity and slip length are determined by fitting a straight line (linear fitting) to the velocity profile in the central portion of the channel. The results show that the slip velocity or the slip length is a quadratic function of the parameter \begin{document}${a_{\rm wf}} $\end{document}, namely, the slip velocity or the slip length is a quadratic function of the contact angle. A physical mechanism of the fluid slip over hydrophobic surfaces is also proposed. The density profile is uniform for the no-slip condition, but there is a layer of low density fluid near the wall when the fluid can slip at the wall surface. This low density region can disrupt the momentum transfer between the wall and the fluid, which induces the fluid slip at the wall surface.

Effects of wall slip on the dynamic characteristics of water-lubricated bearing considering rough contact

Effects of Lubricant Viscosity-Temperature Relationship on the Capacity of Sliding Bearing

Influence of wall slip of lubricants on performance of elastohydrodynamic lubrication in line contact

Optimization transient wear and contact performances of water-lubricated bearings under fluid-solid-thermal coupling condition using profile modification

Effects of Surface Texture on Turbulent Lubrication of Water-lubricated Journal Bearing

Influence of squeezing and interface slippage on the performance of water-lubricated tilting-pad thrust bearing during start-up and shutdown

Experimental study on seismic performance of laminated rubber bearings with friction slipping

Influence of Slip Effect on Viscous Dissipation Heat and Lubrication Characteristics of Gas Journal Bearing: A Multiscale Analysis

Effects of Surface Roughness on Sliding Friction in Lubricated-Point Contacts: Experimental and Numerical Studies

Effects of turbulence and bush wear on the transient tribo-dynamic characteristics of water-lubricated bearings

Investigation on the nonlinear dynamic behaviors of water-lubricated bearings considering mixed thermoelastohydrodynamic performances

Effects of Surface Roughness on the Mixed Thermal Elstohydrodynamic Lubrication Characteristics of Surface Textured Slipper Bearing in Axial Piston Pump

Theoretical and experimental exploration into the fluid structure coupling dynamic behaviors towards water-lubricated bearing with axial asymmetric grooves

Fluid dynamics simulation on the water lubricating performance of surface micro-/nano-textured surfaces considering roughness structures

Experimental Study of the Interfacial Slip on Hydrodynamic Lubrication Under Different Wettabilities

A Numerical Investigation of the Effects of Groove Texture on the Dynamics of a Water-Lubricated Bearing–Rotor System

A mixed-lubricated friction model of water lubricated bearing based on fractal theory

Simulations And Measurements Of Sliding Friction Between Rough Surfaces In Point Contacts: From Ehl To Boundary Lubrication

Transient mixed-lubrication analysis of low-viscosity lubricated bearings under impact load with consideration of turbulence

Numerical analysis of turbulence effect for coupled journal-thrust water-lubricated bearing with micro grooves

Fluid Slip over Hydrophobic Surfaces in Microchannels: a Dissipative Particle Dynamics Study