Abstract:In order to investigate the influence of surface micro-texture on the oil film carrying capacity, a theoretical model of dynamic pressure lubrication is constructed based on CFD, and dynamic pressure lubrication simulation and friction and wear experimental research are used to analyse the influence of speed and load on the friction behaviour of the bearing pair, and the wear performance of the specimen is evaluated by means of the surface morphology and friction coefficient. The results show that the carrying capacity of the oil film on the textured surface is relatively large compared with that of the non-textured surface, showing regular fluctuations, and that the pressure values of turbulent flow are greater than those of laminar flow. As the rotational speed increases, the cavitation effect becomes more and more obvious, and the carrying capacity of the oil film increases. The smaller the thickness of the surface oil film, the higher the load carrying capacity and the lower the degree of wear; The surfaces of the textured specimens showed the best friction reduction and anti-wear properties, followed by the smooth surfaces and the worst rough surfaces. With the increase of rotational speed, the friction coefficient tends to decrease. When the rotational speed is 0.4 m/s, the wear of the textured surface is reduced. With the increase of load, the thickness of the formed oil film decreases, the friction coefficient decreases, and the anti-friction effect of the textured surface increases. This indicates that the surface texure treatment of 304 stainless steel, and the selection of appropriate working condition parameters can effectively reduce wear during the friction process, and improve the wear resistance of bearings.

Effects of turbulence and bush wear on the transient tribo-dynamic characteristics of water-lubricated bearings

Effects of Wear and Shaft-shape Error Defects on the Tribo-dynamic Response of Water-lubricated Bearings Under Propeller Disturbance

Effects of Surface Texture on Turbulent Lubrication of Water-lubricated Journal Bearing

Investigation on the nonlinear dynamic behaviors of water-lubricated bearings considering mixed thermoelastohydrodynamic performances

Transient mixed-lubrication analysis of low-viscosity lubricated bearings under impact load with consideration of turbulence

Transient nonlinear dynamics of the rotor system supported by low viscosity lubricated bearing

On the tribo-dynamic behaviors during start-up of water lubricated bearing considering imperfect journal

Numerical study on mixed lubrication performance of misaligned microgroove water-lubricated bearings considering cavitation and turbulence effects

A tribo-dynamic model of coupled journal-thrust water-lubricated bearings under propeller disturbance

Optimization transient wear and contact performances of water-lubricated bearings under fluid-solid-thermal coupling condition using profile modification

Numerical analysis of turbulence effect for coupled journal-thrust water-lubricated bearing with micro grooves

Mixed Turbulent Lubrication Analysis of Worn Journal Bearing with End Oil Supply

Influence of micro-texture radial depth variations on the tribological and vibration characteristics of rolling bearings under starved lubrication

Transient mixed thermal elastohydrodynamic lubrication analysis of aero ball bearing under non-steady state conditions

A mixed-lubricated friction model of water lubricated bearing based on fractal theory

Analytical and Experimental Investigation of Vibration Characteristics Induced by Tribofilm-Asperity Interactions in Hydrodynamic Journal Bearings

Study on coupling transient mixed lubrication and time-varying wear of main bearing in actual operation of low-speed diesel engine

Analysis of turbulent cavitation effects on water-lubricated bearing in single screw compressors

Effects of Water Contamination on Thermal Elastohydrodynamic Lubrication of Journal Bearing

Study on the wear performance of 304 stainless steel aerospace joint bearings

Nonlinear tribo-dynamic performance and transient stability for marine dynamically loaded offset-halves journal bearings